Midland LXT326 Two Way Radio - Answered Questions & Fixed issues


Check your charger.
Check your radio programming.
Post back with further questions.

Best regards.

Midland LXT326... | Answered on Feb 17, 2016 | 239 views


See other entry...
Peter

Midland LXT326... | Answered on Mar 06, 2013 | 177 views


You should be able to put in the make/model number followed by headset and that will get you to the ones you need.

Midland LXT326... | Answered on Jan 24, 2013 | 36 views


I think you meant 70-0351c?
I believe this is a 60 watt transceiver. So if you remember ohms law P=IxE or power equals amps times volts so 5 amps times 12 volts equals 60 watts. Use a 5 amp fuse.

Midland Radio... | Answered on Aug 29, 2019 | 37 views


Contact Midland directly to inquire.

Midland Radio... | Answered on Jul 29, 2019 | 31 views


If its a real old radio Midland may not have it---Google that model number with "manual" to see what is available.

Midland Radio... | Answered on May 30, 2019 | 273 views


NOT SOMETHING THAT YOU PROGRAM . YOU JUST TURN IT ON THEN SELECT THE CHANNEL YOU WANT TO USE .

Midland Radio... | Answered on Apr 12, 2019 | 42 views


go to radio shack or best buy you need a step up transformer .or you can buy a travel kit and you dont need a lot of watts transformer to do this dont let them rip you off on a high watt one.

Midland Radio... | Answered on Mar 01, 2019 | 41 views


Yes. They call it silent operation.
To set SILENT OPERATION, press the MENU button until the display shows a "bP" icon. Select "on" or "oF" by pressing the s\t buttons and push the PTT key or MENU button.

Midland Radio... | Answered on Nov 02, 2018 | 66 views


Not on FRS. FRS has only one power level and it's set to low.
GMRS ERP output on the 1050 is approximately 0.4w low; 1.5w mid; and 3.07w High according to operator blogs.

Midland Radio... | Answered on Sep 30, 2018 | 67 views


There are only 2 wires for the speaker. It doesn't matter how they are connected to the radio. Switching the wires will not make any difference.

Midland Radio... | Answered on Jan 27, 2018 | 119 views


I would say no, it's not repeater capable for widespread use. After taking a look at a photo of this radio, I don't see any buttons to program a specific frequency that would allow listening to a nearby repeater. The GMRS frequencies for this radio, probably in the 462.000 range, are preprogrammed and locked in. If you're lucky, you might discover a repeater in your area on the UHF band in this range - just for listening. It would require a FCC license under Part 97 of the FCC rules to transmit. The GMRS radios can be licensed under Part 95, mainly for family members to communicate with each other. Hope this helps.

Midland Radio... | Answered on Jan 18, 2018 | 217 views


There can be a number of problems causing this. The most likely cause is something is wrong in one or both of the antenna lines.

Another problem could be that one of the radios has a broken connection at the antenna jack on the rear. I am sure that you will find the problem with one of them, not both, if you have the SWR and output power checked on both radios.

You did not say if you have tried contacting others from both radios. The one that can't talk to others has the problem.

Midland Radio... | Answered on Dec 15, 2017 | 87 views


Your volume control is damaged, or the ground connection has lifted. It should not be an expensive repair if you need to take it to a tech.

Midland Radio... | Answered on Dec 15, 2017 | 61 views


It sounds to me that you have a defective battery. This can happen if a radio is left on charge or left uncharged for an extended period of time. I could be wrong but this is the most likely cause, especially if the battery is not a lithium one. They have this problem as well from time to time.

Midland Radio... | Answered on Dec 15, 2017 | 45 views


Failing batteries. Old batteries tend to recharge only partially and discharge rapidly.

Midland Radio... | Answered on Dec 13, 2017 | 92 views


Try Googling (midland)(gxt1050p)(manual) without parens.

Midland Radio... | Answered on Jul 21, 2017 | 40 views


Use the owners manual & check your set up. Problem still present, replace battery. May the force be with you.

Midland Radio... | Answered on Jul 16, 2017 | 64 views

Not finding what you are looking for?
Midland LXT326 Two Way Radio Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...