20 Most Recent Linksys Wireless-G WUSB54G 802.11g/b Questions & Answers


Hello friend,
If you have lost the install CD then go here.
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=50e15555cbe54094baf0a9ca725cc9f1_Manual_Adapter_Installation.xml&pid=80&converted=0

As with most computer problems....it's all about the DRIVERS.

Linksys... | Answered on Aug 25, 2014


www.linksys.com click on support and put in your adapter name follow the on screen instructions! Linksys website is the best source for drivers and firmware

Linksys... | Answered on Sep 03, 2011


Please provide more information as to you issue such as :
a. model number
b. year manufactured/firmware updated
c.Are you using router wirelessly or hard connected.
d. You have checked the user manual 1st.
e. You have confirmed that you have connectivity with the ISP ( internet service provider)
f. check your firewall in the "security settings" to see if you allowed uploads
to a specific site.

Linksys... | Answered on Mar 09, 2011


There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Linksys... | Answered on Feb 15, 2011


Hi there

As I understand it you get Unkown device notice when you plug the router in to your PC via USB.

With routers/modems/access points that have USB connection the PC do not pick up the USB like other devices. You will have to install the drivers for the USB which will be on the CD that came with the Linksys.

You can go to the following link to get more details on the drivers: Linksys(Cisco) Support


Hope this helps

Linksys... | Answered on Feb 03, 2011


My Friend,


Uninstall that form the computer and restart the computer.
You will find found new hardware on the taskbar .
Click on the found new hardware baloon.
install the device from this wizard.
Browse for the cd and install software from here .
Restart the computer after that.

Regards:-
Amit

Linksys... | Answered on Jan 09, 2011


Search at Microsoft Support Site for Wireless Zero Connection to configure your router.

Linksys... | Answered on Dec 05, 2010


Hello
Win 7 Should supply the drivers or software automaticly.
Try this.
1 Shut down pc.Remove all cables from router including power cable.
2 There should be a reset button in the back of the router hold it in with a pen tip or paper clip for 1 min.
3 Plug power back into router and all cables.
4 Restart pc.
Once pc is started go to control panel/network and sharing center, and be sure your on home netwok.
If you are asked for a wep code from the router.
1 Open up your browser and type in 192.168.1.1 in address bar and hit enter.

username will be admin
password will be the word password

Once in look under security settings and you will find the wep code wich you may need to enter in your adapters setup program.


Im going to leave you a link to your routers manufacturer.

http://homesupport.cisco.com/?pagename=HS%2FCommon%2FDynamicWrapper&site=HSus&application=HS&locale=en_US&ppath=supportsearch&c=Page&support_keyword=Linksys+Wireless-G+WUSB54G&lang=en&keywords=Linksys+Wireless-G+WUSB54G+

Linksys... | Answered on Dec 02, 2010


If this has been sent to you by your ISP when you joined, ring them and tell them its stopped working and the should send you a new one.
It sounds like some circuitry has died, replacement required.

Linksys... | Answered on Oct 29, 2010


try different usb ports.

trying something else with a usb connection, if it restarts will all of the above then its a dodgy usb connection which has weaken during the hibernation period. and will need looking by a techy.

if the above dont do anything then it could be the adapter

Linksys... | Answered on Oct 15, 2010


http://homesupport.cisco.com/en-us/wireless/lbc/WUSB54G

Select the tab which says "Downloads" and provide the version number of your adapter. You can then download the corresponding driver files and install it.

For further clarifications, revert!
Thanks for asking,
Arvind S Iyer

Linksys... | Answered on Sep 30, 2010


Just use the Windows Zero configuration to connect to the wireless network.

On the system tray ( bottom right corner of the screen ), you'll see the Linksys WLAN monitor ( green Icon ). Right click on that icon and select use windows Wireless Zero Configuration, then click yes if you will be asked if you want to do it.

Then connect wirelessly using windows.
Go to the control panel > network and internet > network connections.
Right click the wireless network connection > go to properties > go to the wireless networks tab > make sure that the box on the top is checked ( use windows to configure... ) > then click on view available wireless networks > connect to your network, make sure that you're typing in the right password because it is very case sensitive.

Linksys... | Answered on Sep 16, 2010

Not finding what you are looking for?
Linksys Wireless-G WUSB54G 802.11g/b Logo

88 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

unkown device when plus in usb pc

  • Computers & Internet
Loading...