20 Most Recent NetGear N600 Wireless Dual Band Router Questions & Answers

Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | Answered on Nov 14, 2018

Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | Answered on Nov 14, 2018

First verify your wireless password, I highly suggest you log into your router and change it to a pass phrase that's easy to remember, such as:


That's even overkill, but you get the point, easy to remember and easy to enter into smart devices.

NetGear N600... | Answered on Jan 12, 2018

Get clarification from STC.

NetGear N600... | Answered on Oct 30, 2017

Usually there are 2 types of wireless connections, 2.4 GHz and 5 GHz. Your laptop may not be able to connect to one of these connections, so it may be incompatible with your router. You can try buying a USB networking card (no more than $20). It will plug into one of your USB ports and should allow you to connect to your router. Hope this helps!

NetGear N600... | Answered on Jun 22, 2017

connect by Ethernet cable one end back of router and other LAN port of the vonage

skype id : johnwalker800969@gmail.com

NetGear N600... | Answered on Sep 13, 2016

Canon mx860 won't connect to network

NetGear N600... | Answered on Jun 29, 2016

Are you having trouble with the WiFi? I've never had a smart phone, or anything else for that matter, suggest forgeting a network. The list of remembered networks just gets longer and longer over time. However, if you go into WiFi settings there are things you can do to clean up the list of networks like set a priority order/move up and down or forget/remove old networks. In summary, unless you are having trouble with the wifi, this may be a normal thing you just recently noticed.

NetGear N600... | Answered on Jun 19, 2015

The reset procedure of a router, is most of the time printed on the underside of the router. Most of the time you have to push a button for a certain time, or unplug it form the power for at least one minute or so. Page 120 of the manual says:

25666674-430tztikrat04csse0ovhla5-5-0.png The complete manual you find here:

On page 120 you also see what settings are in the router. But perhaps you need it, to setup everything from scratch.

NetGear N600... | Answered on Apr 26, 2015

There is a Quick start guide that comes with the router, if you log in there is a setup wizard mode that will walk you thru the setup asking you questions about your service...

NetGear N600... | Answered on Mar 18, 2015

Look for an inactivity timeout on AOL software.

NetGear N600... | Answered on Mar 09, 2015

download driver and software from the following link:

In order to achieve wireless capabilities you need to temporarily connect a USB cord into the computer and printer to find your wireless network through the HP software. If you have a Windows computer and the Solution Center is already installed on your computer, then follow these steps:
1. Go into Devices and printer
2. Right click on the printer, select remove device
3. Click on your Start Menu, then All Programs
4. Click on the HP folder
5. Click on your printer, then printer set up and software
6. Click on add a new printer, click on wireless (This is where you can temporarily connect your USB cord)

NetGear N600... | Answered on Mar 08, 2015

You can still use IPV4 instead.

IPV6 will be rejected anyway, so you don't need to turn it off.

NetGear N600... | Answered on Mar 08, 2015

Forget the AES encryption, it is a type of encryption used.

What you need to be setting up is the protocol for wireless networks, WEP, WPA etc. that carries the data, encrypted or not between the computer and the printer.

They both must be the same type and have the same password set up.

NetGear N600... | Answered on Mar 08, 2015

Do you mean it doesn't power on or won't connect to the internet?
If it powers on OK do the lights flash as described in the manual
If the router worked before why should you need new firmware, doesn't make sense.

NetGear N600... | Answered on Nov 16, 2014

Go back and reload the firmware if that solves it you are good to go if not revert back to factory firmware and then post a note on Netgears site,could be a bug in their firmware.

NetGear N600... | Answered on Apr 18, 2014

Wireless devices do not use drivers. Try NetGear Suppot : http://downloadcenter.netgear.com/

NetGear N600... | Answered on Nov 30, 2013

Not finding what you are looking for?
NetGear N600 Wireless Dual Band Router Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers


Level 3 Expert

13434 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

need reset password factory settings

  • Computers & Internet