Top 20 NetGear N600 Wireless Dual Band Router Questions & Answers


First verify your wireless password, I highly suggest you log into your router and change it to a pass phrase that's easy to remember, such as:

SecureWifipassword1

That's even overkill, but you get the point, easy to remember and easy to enter into smart devices.

NetGear N600... | 70 views | 0 helpful votes


Get clarification from STC.

NetGear N600... | 65 views | 0 helpful votes


Usually there are 2 types of wireless connections, 2.4 GHz and 5 GHz. Your laptop may not be able to connect to one of these connections, so it may be incompatible with your router. You can try buying a USB networking card (no more than $20). It will plug into one of your USB ports and should allow you to connect to your router. Hope this helps!

NetGear N600... | 100 views | 0 helpful votes


connect by Ethernet cable one end back of router and other LAN port of the vonage


skype id : johnwalker800969@gmail.com

NetGear N600... | 197 views | 0 helpful votes


Are you having trouble with the WiFi? I've never had a smart phone, or anything else for that matter, suggest forgeting a network. The list of remembered networks just gets longer and longer over time. However, if you go into WiFi settings there are things you can do to clean up the list of networks like set a priority order/move up and down or forget/remove old networks. In summary, unless you are having trouble with the wifi, this may be a normal thing you just recently noticed.

NetGear N600... | 81 views | 0 helpful votes


The reset procedure of a router, is most of the time printed on the underside of the router. Most of the time you have to push a button for a certain time, or unplug it form the power for at least one minute or so. Page 120 of the manual says:

25666674-430tztikrat04csse0ovhla5-5-0.png The complete manual you find here:

http://www.downloads.netgear.com/files/GDC/WNDR3400V2/WNDR3400v2_UM_23JAN2013.pdf
On page 120 you also see what settings are in the router. But perhaps you need it, to setup everything from scratch.

NetGear N600... | 66 views | 1 helpful votes


Hi
Do you mean it doesn't power on or won't connect to the internet?
If it powers on OK do the lights flash as described in the manual
If the router worked before why should you need new firmware, doesn't make sense.

NetGear N600... | 119 views | 0 helpful votes


There is a Quick start guide that comes with the router, if you log in there is a setup wizard mode that will walk you thru the setup asking you questions about your service...

NetGear N600... | 129 views | 1 helpful votes


Forget the AES encryption, it is a type of encryption used.

What you need to be setting up is the protocol for wireless networks, WEP, WPA etc. that carries the data, encrypted or not between the computer and the printer.

They both must be the same type and have the same password set up.

NetGear N600... | 325 views | 0 helpful votes


Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | 185 views | 0 helpful votes


You can still use IPV4 instead.

IPV6 will be rejected anyway, so you don't need to turn it off.

NetGear N600... | 204 views | 0 helpful votes


Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | 113 views | 0 helpful votes


download driver and software from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor%E2%80%8By?cc=us&lc=en&dlc=en&product=3940574

In order to achieve wireless capabilities you need to temporarily connect a USB cord into the computer and printer to find your wireless network through the HP software. If you have a Windows computer and the Solution Center is already installed on your computer, then follow these steps:
1. Go into Devices and printer
2. Right click on the printer, select remove device
3. Click on your Start Menu, then All Programs
4. Click on the HP folder
5. Click on your printer, then printer set up and software
6. Click on add a new printer, click on wireless (This is where you can temporarily connect your USB cord)

NetGear N600... | 72 views | 0 helpful votes


Go back and reload the firmware if that solves it you are good to go if not revert back to factory firmware and then post a note on Netgears site,could be a bug in their firmware.

NetGear N600... | 73 views | 0 helpful votes


default user name and password is on a sticker on the bottom of the N600 router. Great router btw

NetGear N600... | 43 views | 0 helpful votes


If your wireless access suddenly requires a password, one of two things has happened...
either you are inadvertently trying to connect to a neighbor's wireless router, or someone has modified your router.
If you are certain it is your router you are attempting to connect to, and it is requiring a password you did not setup, your best bet is to perform a hard reset. There should be a reset button on the back of your router. You should press and hold this button for a few seconds. This will clear all setup information and return the router to factory setup.
In order to setup your router from this point, you will need to connect directly to the router, perform whatever setup options you prefer, and then you should be able to connect wirelessly.
It is highly recommended that you setup a password for wireless access. It is also recommended you change the admin password to prevent someone else from making unwanted modifications.

NetGear N600... | 86 views | 0 helpful votes


Canon mx860 won't connect to network

NetGear N600... | 197 views | 0 helpful votes


Look for an inactivity timeout on AOL software.

NetGear N600... | 228 views | 0 helpful votes


Select Wireless under the Configuration tab, then select Advanced from the side menu the beacon setting should be the 3rd setting listed.


The default beacon setting should be good for any setup it might help to know why you want it changed.

NetGear N600... | 998 views | 0 helpful votes

Not finding what you are looking for?
NetGear N600 Wireless Dual Band Router Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

need reset password factory settings

  • Computers & Internet
Loading...