NetGear N600 Wireless Dual Band Router - Answered Questions & Fixed issues


Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | Answered on Nov 14, 2018 | 185 views


Orange light means no internet connection.

Check the cable and settings.

NetGear N600... | Answered on Nov 14, 2018 | 113 views


First verify your wireless password, I highly suggest you log into your router and change it to a pass phrase that's easy to remember, such as:

SecureWifipassword1

That's even overkill, but you get the point, easy to remember and easy to enter into smart devices.

NetGear N600... | Answered on Jan 12, 2018 | 70 views


Get clarification from STC.

NetGear N600... | Answered on Oct 30, 2017 | 65 views


Usually there are 2 types of wireless connections, 2.4 GHz and 5 GHz. Your laptop may not be able to connect to one of these connections, so it may be incompatible with your router. You can try buying a USB networking card (no more than $20). It will plug into one of your USB ports and should allow you to connect to your router. Hope this helps!

NetGear N600... | Answered on Jun 22, 2017 | 100 views


connect by Ethernet cable one end back of router and other LAN port of the vonage


skype id : johnwalker800969@gmail.com

NetGear N600... | Answered on Sep 13, 2016 | 197 views


Canon mx860 won't connect to network

NetGear N600... | Answered on Jun 29, 2016 | 197 views


Are you having trouble with the WiFi? I've never had a smart phone, or anything else for that matter, suggest forgeting a network. The list of remembered networks just gets longer and longer over time. However, if you go into WiFi settings there are things you can do to clean up the list of networks like set a priority order/move up and down or forget/remove old networks. In summary, unless you are having trouble with the wifi, this may be a normal thing you just recently noticed.

NetGear N600... | Answered on Jun 19, 2015 | 81 views


The reset procedure of a router, is most of the time printed on the underside of the router. Most of the time you have to push a button for a certain time, or unplug it form the power for at least one minute or so. Page 120 of the manual says:

25666674-430tztikrat04csse0ovhla5-5-0.png The complete manual you find here:

http://www.downloads.netgear.com/files/GDC/WNDR3400V2/WNDR3400v2_UM_23JAN2013.pdf
On page 120 you also see what settings are in the router. But perhaps you need it, to setup everything from scratch.

NetGear N600... | Answered on Apr 26, 2015 | 66 views


There is a Quick start guide that comes with the router, if you log in there is a setup wizard mode that will walk you thru the setup asking you questions about your service...

NetGear N600... | Answered on Mar 18, 2015 | 129 views


Look for an inactivity timeout on AOL software.

NetGear N600... | Answered on Mar 09, 2015 | 228 views


download driver and software from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor%E2%80%8By?cc=us&lc=en&dlc=en&product=3940574

In order to achieve wireless capabilities you need to temporarily connect a USB cord into the computer and printer to find your wireless network through the HP software. If you have a Windows computer and the Solution Center is already installed on your computer, then follow these steps:
1. Go into Devices and printer
2. Right click on the printer, select remove device
3. Click on your Start Menu, then All Programs
4. Click on the HP folder
5. Click on your printer, then printer set up and software
6. Click on add a new printer, click on wireless (This is where you can temporarily connect your USB cord)

NetGear N600... | Answered on Mar 08, 2015 | 72 views


You can still use IPV4 instead.

IPV6 will be rejected anyway, so you don't need to turn it off.

NetGear N600... | Answered on Mar 08, 2015 | 204 views


Forget the AES encryption, it is a type of encryption used.

What you need to be setting up is the protocol for wireless networks, WEP, WPA etc. that carries the data, encrypted or not between the computer and the printer.

They both must be the same type and have the same password set up.

NetGear N600... | Answered on Mar 08, 2015 | 325 views


Hi
Do you mean it doesn't power on or won't connect to the internet?
If it powers on OK do the lights flash as described in the manual
If the router worked before why should you need new firmware, doesn't make sense.

NetGear N600... | Answered on Nov 16, 2014 | 119 views


Go back and reload the firmware if that solves it you are good to go if not revert back to factory firmware and then post a note on Netgears site,could be a bug in their firmware.

NetGear N600... | Answered on Apr 18, 2014 | 73 views


Wireless devices do not use drivers. Try NetGear Suppot : http://downloadcenter.netgear.com/

NetGear N600... | Answered on Nov 30, 2013 | 78 views


Go to www.netgear.com to download your resource software. You will need your model number, the N600 will not do it. Flip that router upside down or look on the sides for the actual model number or serial. Punch that in on the site to locate your download. Once you have downloaded it, run it. Hopefully that fixes your problem.

NetGear N600... | Answered on Nov 30, 2013 | 1,480 views


default user name and password is on a sticker on the bottom of the N600 router. Great router btw

NetGear N600... | Answered on Nov 20, 2013 | 43 views

Not finding what you are looking for?
NetGear N600 Wireless Dual Band Router Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...