20 Most Recent Bunn 340000068 6 Gal Model Black ULTRA2 AFI Frozen Drink Machine Questions & Answers

Lift it up from the hole at the bottom and off of the shaft

Bunn 340000068 6... | Answered on Jan 28, 2015

the sensor is inside the rear cowling and in the tube at the top behind the thermal wrap (black putty). pull it out and replace. you'll need to contact bunn for parts

Bunn 340000068 6... | Answered on Jan 28, 2015

Lift it up from the hole at the bottom and off of the shaft

Bunn 340000068 6... | Answered on Jan 28, 2015

lift it up from the post at the bottom and off of the shaft

Bunn 340000068 6... | Answered on Jan 28, 2015

there is a sensor on each side in the back that monitor the speed of the auger to determine thickness of the slush. if the sensor is dusty, it causes an error.

remove the 2 screws and the panel in the back behind the bowl on that side. you will see the motor and the sensor in front of it. use compressed air to blow out any dust. next, check to see if there are 2 pins on the shaft that pass the sensor. if one is gone, you will need to have it replaced.

Bunn 340000068 6... | Answered on Aug 03, 2011

Hi mikelupe64,

I saw your post you mentioned that the left barrel has a fault, and it Drops OFF voltage when the compress starts.

Assembly Manual

Possible that the Left condenser is experiencing problems causing the left barrel to drop voltage when compress starts.

Bunn 340000068 6... | Answered on Jul 06, 2011

It can be weak compressor or faulty auger motor or faulty valve connections.As you mentioned that valves loose voltage as compressor comes on, this is indication of weak compressor or main board.If the compressor voltage checks ok then its main control board problem.-------- You will have to test it with meter. ---------- This unit has a warranty on it, if its not very old.--------- The warranty details is as follows:-- 1) All equipment other than as specified below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor. 4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first ------------ This should help.Thanks.Helpmech.

Bunn 340000068 6... | Answered on Jul 06, 2011

The Bunn Ultra-2 originally came with several circuit boards, including the main control board and a small memory board also known as the "TIC Clock". This little board, screwed in directly behind the main control board and has a small round metal circuit on it that looks like a watch battery, but it is not -- the metal "Can" contains the timing and memory functions for the main control board.
There is also a small battery inside the "can", which maintains the memory when power is removed from the machine. Over time, this battery will fail and you will see an error message on your LCD readout that says ":Bad TIC Clock". In the past you could just buy a new TIC Board from Bunn and install it and you'd be back on your way again. But, Bunn no longer sells the TIC Board and instead Bunn wants you to purchase a new Main Circuit Board that has the memory and timing functions built right on the new Main Board. The list price is over $200.
You can now purchase a TIC Board Rehabilitation kit from the Margarita Guys for under $50 which will replace the failed circuitry on the small TIC Board. Go to ebay and search "Bunn TIC Board" and you will see the kit available there. It includes all the necessary tools, 9 pages of detailed instructions and annotated photos, free Priority Shipping, and free phone access to their Bunn trained and certified Journeyman Technicians for any help you may need.
This should be the perfect answer to resolve your Bad TIC Clock message and the working errors that come with it.

Bunn Kitchen... | Answered 2 days ago

hi, from my experience 1. the main board/ecu may have a faulty solenoid. there are two solenoids on the board, 1 for each side. if the left auger works, then it's the right solenoid. its close to im[possible to replace the solenoids unless u have good connections to china!!
2. the right motor auger in the back might have a fault or bad electrical connection, very rare.
exchange the electrical connections to the motor from left to right and vice versa. then you know what is faulty.
3. good luck
4. you can order mainboards/ecu's at bunn.com. they r reasonable priced

Bunn Kitchen... | Answered on Dec 19, 2017

either mix too rich, torque set too low, shaft spring bent, compressor relay blown, compressor contactor shorted, refrigeration valve solenoid bad, or filter dirty thus reducing air flow. if it's both sides, clean the filter and check the compressor relay (behind right side panel, behind plastic cover on compressor. if you smell burning electric, replace) and the contactor (behind right side panel at the top, tan box with wires. press the tiny button to start compressor. if it doesn't start, replace). if it's only one side, check the valve solenoid (inside left side panel, there are 2 valves. remove plugs from each and retouch to terminals while on. if they click, they work).

Bunn Kitchen... | Answered on Jan 28, 2015

if the noise is from the rear top, the auger motor needs to be lubed. if it's only when it's freezing, it may be the fan motor.

Bunn Kitchen... | Answered on Jan 28, 2015

you will have to replace the faucet seals. after a while, the surface of the seals bubble and crease causing them to leak.

Bunn Kitchen... | Answered on Nov 30, 2014

the solenoid may be stuck open

Bunn Kitchen... | Answered on Sep 08, 2014

Not finding what you are looking for?
Bunn 340000068 6 Gal Model Black ULTRA2 AFI Frozen Drink Machine Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Bunn Kitchen Appliances - Others Experts


Level 3 Expert

2239 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers


Level 1 Expert

21 Answers

Are you a Bunn Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bunn Kitchen Appliances - Others

  • Bunn Kitchen Appliances - Others

Most Popular Question

remove support drum when shipped

  • Kitchen Appliances - Others