20 Most Recent Samsung DMT400RHW Builtin Dishwasher Questions & Answers

I had the same problem, SAMSUNG did not want to tell me how to fix so I jumped in with research I found that after you remove the power supply, i.e. plug, 1) you need to remove the dishwasher and turn it upside down. 2) There is a white sensor tray; 12x12 approx. on the bottom held in with two screws, remove the screws and use a flat head screwdrider to undo the clips holding the tray in place. 3) Dry the tray and sensor tips with a towel and replace the tray. Bammmm, you have just fixed the LE(leaking error) code error.

Samsung... | Answered on Aug 13, 2015

Did you get a solution for this problem because my dishwasher is doing the same thing.

Samsung... | Answered on Apr 16, 2013

The arm may be damaged or defective.

Samsung... | Answered on Aug 15, 2019

The Normal, Heavy and Smart lights will blink when there is low water level in the dishwasher. Check that the sump area isn't blocked from filling with water. Often there is a float inside the tub that can be held down by a utensil that fell under the lower basket. Remove any foreign objects. Then try to run the dishwasher when it is completely empty. The parts diagram for the dishwasher is available here: https://www.searspartsdirect.com/model/60yajq87a8-001482/samsung-dw7933lrabb-aa-01-dishwasher-parts . If there isn't an obvious blockage in the water level monitors, you could have a wiring problem or an issue with the control board that doesn't get the signal for water reaching the desired level. (Note: if the incoming water pressure were too low, only the Smart light would flash.)

The manual for the DW7933LRABB is available from Sears Parts Direct on the product page: https://www.searspartsdirect.com/manual/60yajq87a8-001482/samsung-dw7933lrabb-aa-01-dishwasher . The current link to the manual is https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/1206228L.pdf .

I hope this helps.

Cindy Wells

Samsung... | Answered on Aug 05, 2019

Check bottom pan for water flood switch located there so it’s trying to pump water out check for leak cause or if you are opening door to add dishes while it’s alrea started this could cause water leak dripping down into pan

Samsung... | Answered on Jun 17, 2019

Just look on the words written fuse to your dishwasher

Samsung... | Answered on Jun 16, 2019

There is no internal fuse that I am aware of, if it will not run then more then likely the control panel is defective.

Samsung... | Answered on Jun 07, 2019

Could pump or controller failure

Samsung... | Answered on Jun 01, 2019

If it says there is a leak, then there is one. Water leaks into a sealed tray in the base of the machine and that is where the safety switch is. You never see water on the floor because it is contained. See the videos

How To Fix Samsung Dishwasher with LC Error Code - YouTube

9k=? 3:43 Nov 12, 2017 - Uploaded by How To Fix It Workshop In this video I describe why my Samsung dishwasher has the LC error code and how I remove the bottom ...

Samsung dishwasher LC error code fix/reset - YouTube

z? 3:52 Oct 18, 2017 - Uploaded by Mike Barber How I fixed my LC error code. ... Samsung dishwasher LC error code fix/reset. Mike Barber. Loading ...

Samsung LC Leak Error Clear - YouTube



Samsung... | Answered on May 06, 2019

Not finding what you are looking for?
Samsung DMT400RHW Builtin Dishwasher Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts


Level 3 Expert

1234 Answers


Level 3 Expert

3042 Answers

Cindy Wells

Level 3 Expert

5968 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Dishwashers

  • Samsung Dishwashers

Most Popular Question

samsung dishwasher error light heavy

  • Dishwashers