20 Most Recent Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304) Questions & Answers


try a blank password
could be 192.168.2.1

Gateway Belkin... | Answered on Feb 10, 2018


In Windows, run "cmd". Type "ping google.com". If you can ping google.com, the problem is with the websites you are trying to surf. If you cannot ping google, there is a problem with your connection. This sounds like a used wireless router

You might need to configure it. See this: https://www.linksys.com/us/support-article?articleNum=139668#H2

Gateway Belkin... | Answered on Oct 16, 2017


do you have internet with the modem? if you do then router is not configure correctly. If you do nothave internet ask you ISP why you are not online with the modem directly.

Gateway Belkin... | Answered on Jun 01, 2017


Go to the setup page for the router (IP 192.168.1.1) and set up the WPA-PSK [TKIP] security. It will allow fairly simple setup, and only provide the pass code to house members.

Gateway Belkin... | Answered on Jun 01, 2017


Hello Ames3pack

Just with your windows firewall, or antivirus program, can do the trick. but if you have the router manual better, ! then you can go inside the box with the IP and set up things!
Carl

Gateway Belkin... | Answered on Jan 30, 2017


You don't need the setup disk check out my four tips here for Wireless Printer and Wireless Routers.

http://www.fixya.com/support/r3559234-set_up_a_wireless_printer_on_your_router

http://www.fixya.com/support/r3958382-access_router_or_cable_modem_admin

http://www.fixya.com/support/r3943298-find_wpa_psk_or_wep_key_in_hex_ascii

http://www.fixya.com/support/r3902413-protect_adsl_bandwidth_download_speeds

The setup disc that you maybe able to find is just a wizard and can't setup printers to your router like in my first tip.

Gateway Belkin... | Answered on Sep 16, 2015


Few things you can try. First would be to do a factory reset. Do this by pressing the reset button for at least ten seconds. If that doesn't work you could try switching ethernet ports.

If that doesn't work your router is probably dead.

Gateway Belkin... | Answered on Aug 03, 2015


On most machines you should simply have to click on the wireless icon, which is usually in the bottom left corner. After that you click on the network that you want to join and may have to input password.

Gateway Belkin... | Answered on Aug 03, 2015


No problem unless it has a password to enter (192.168.x.x) in the router configuration.

Gateway Belkin... | Answered on Jan 14, 2015


first connect the devices in this way
from us inter net modem to belkin routers inter net port connect a ether net cable rj45-->then connect another ether net cable rj45 from pc to -->ethernet port on teh belkin router>and reboot the router and modem if u r using cable inter net then immediatly that will work>and open a browser window type this in address bar http://192.168.2.1 u can see the belkin login screen and follow this link
http://www.gorge.net/help/wizard/belkin/f5d7230-4_pppoe.htm
rate me solved if its helps

Gateway Belkin... | Answered on May 21, 2014


Samay,

You should reset your router to clear all information from it. The best procedure to fully clear your device would be to press the reset button with power on for 30 seconds; while continuing to press the reset button, remove power from the unit; and while continuing to press the reset button restore power for 30 seconds.

You should now be able to access the menus after the unit boots up with the default user name/password for the unit. If you do not know them, just Google [your router name] default user name and password. You can now set up the router to meet your requirements. There is a lot of information that will help you on the Internet, but having a clean booted router is important to start with.

Gateway Belkin... | Answered on Mar 18, 2014


I'm thinking modem/router combination. first power down modem and router. Then leaving router unplugged, power up modem, make sure it's sync up then power up router. If this is a wireless connection search for your networks name on computer/laptop..ie View wireless connection. Windows allows a automatic setup if the wireless connection is unsecured. If it is secured Windows 7 will prompt a pass phrase/ or access code. Good luck. Repeat process if necessary

Gateway Belkin... | Answered on Dec 22, 2013

Not finding what you are looking for?
Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304) Logo

352 questions posted

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Gateway Computers & Internet

  • Gateway Computers & Internet

Most Popular Question

belkin 54g

  • Computers & Internet
Loading...