20 Most Recent Alba LDVD1538WDCH LCD TV Questions & Answers


Beware!!! Dracula effect behind it.

Alba... | Answered on May 15, 2016


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Alba... | Answered on Feb 25, 2016


Try a hard reset to it. If it not help you, the main power supply board is faulty. Replace it. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Alba... | Answered on Jul 30, 2015


hi when u get a no signal its either youre antenna or youre leads check to c if the leads r connected..good luck

Alba... | Answered on Jul 28, 2015


Check and replace its tuner. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Alba... | Answered on May 31, 2015


some tvs require a drive that has its own stand alone power source, & a compatible file system, not all will accept NTFS, Fat32 will only hold files under 4gb try EXFat, or check your manual for what usb devices it accepts, most older tvs wont accept a stick, need external hdd with power.

Alba... | Answered on May 09, 2015


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should trouble shoot. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Alba... | Answered on May 01, 2015


Try Re-set... Turn the TV off. Un-plug it.
Every Tv made in the last 10 years has a Re-set...
Look up on the Net.. How to Re-set your TV...
Keep in mind. If you re-set it. It will go back to how you first got it.....
Hope this helps....

Alba... | Answered on Apr 07, 2015


I bought a RCA universal remote for about $15 very nice, better than the factory. The instructions are excellent. There is a code that needs to be entered for your specific unit on a list with the instructions.

Alba... | Answered on Mar 28, 2015


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should be troubles hooted. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Alba... | Answered on Mar 07, 2015


Check and replace the tuner inside the TV. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Alba... | Answered on Feb 28, 2015

Not finding what you are looking for?
Alba LDVD1538WDCH LCD TV Logo

88 questions posted

Ask a Question

Usually answered in minutes!

Top Alba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Alba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Alba Televison & Video

  • Alba Televison & Video

Most Popular Question

alba tv will not come out standby power

  • Televison & Video
Loading...