20 Most Recent Ricoh Aficio 1018D All-In-One Laser Printer Questions & Answers


samply clean exposure glase and mirrors carfuly

Ricoh Aficio... | Answered on May 09, 2015


Could be photoconductor gears are bad will have to replace unit or fuser unit you will have to decide which one first

Ricoh Aficio... | Answered on May 29, 2014


Remove all paper from unit and carefully check in corners for a paper jam or staple/Paper clip

Ricoh Aficio... | Answered on May 28, 2014


just clean mirrors and expsure glas

Ricoh Aficio... | Answered on Apr 28, 2014


get in user tools and sigen in as supervisor and change password

Ricoh Aficio... | Answered on Apr 28, 2014


first do u hv a scanner and printer connection board in ur machine.if not its imossibal to work u must get one and install it.

Ricoh Aficio... | Answered on Apr 28, 2014


the part numbers are different for each toner from ricoh, Lanier, Savin and Gestetner. From what I recall is the bottles are different, check the old bottle vs new. Also if the machine had run very low you may have to open and close the fron cover several times, this intiates a toner feed program.


www.p4photel.com
http://www.websitetoolbox.com/tool/mb/copierquestions

Ricoh Aficio... | Answered on Apr 28, 2014


194
B SBU White Level Detection Error
The automatic SBU adjustment failed
twenty times consecutively.
• Exposure lamp defective
• Dirty white plate
• Incorrect position or width of white
plate scanning (☛ SP4-015)
• BiCU board defective
• SBU board defective

Problem with the scanner. Check the white registration strip. and clean the mirrors. normally works.

Ricoh Aficio... | Answered on Feb 14, 2014


Try admin and leave password blank if that doesn't work then log on to web monitor . Open your web browser ie or Firefox doesn't matter enter IP address in browser then log in as supervisor no password and change name and password

Ricoh Aficio... | Answered on Jan 23, 2014


replace the thermistor and thermostatic some time maye be power supply

Ricoh Aficio... | Answered on Aug 10, 2013


If you can see it, it is set up right, however, the configuration might be wrong. Go to printer properties in the control panel. Open up the ports tab, select configure port. You will see that it is probably set: protocol:Raw, port:9100. Sometimes the port is 10001. Otherwise, set it to LPR, and put LP1 for the queue Name. That should do it.

Ricoh Aficio... | Answered on Oct 22, 2012

Not finding what you are looking for?
Ricoh Aficio 1018D All-In-One Laser Printer Logo

59 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aficio Ricoh

  • Aficio Ricoh

Most Popular Question

ricoh 1018 copierscan light not coming

  • Office Equipment & Supplies
Loading...