20 Most Recent Ricoh Aficio IS420 Flatbed Scanner - Page 7 Questions & Answers

sc508 is By-pass bottom plate error that means the signal from the by-pass tray HP sensor does not change for 1.0 second after
the by-pass motor has rotated counterclockwise.
the reason could be :
• Disconnect or defective harness of the by-pass motor

Ricoh Office... | Answered on May 08, 2019

ricoh copier mp2014 error code sc 542-01 reset

Ricoh Office... | Answered on May 05, 2019

Make sure you are using a new microchip sensor on the cartridge and be sure it is a good on. Some clones dot work.

Ricoh Office... | Answered on Apr 28, 2019

Place a telephone call to a Ricoh service representative and report code sc556.

Ricoh Office... | Answered on Apr 27, 2019

First step to isolate the connection of your ricoh printer on the Locar area network, use the the ping command. if the connection failed then next step will be the cable, check for the light on the NIC

Ricoh Office... | Answered on Apr 27, 2019

http://support.ricoh.com/bb_v1oi/pub_e/oi/0001027/0001027574/VB2638535/B2638535.pdf section 3 if printer already set up when you add printer printer driver install program should find the printer and ip address

Ricoh Office... | Answered on Apr 27, 2019

Try reading your manual here: https://www.manualslib.com/products/Ricoh-Sp-111-Su-3916135.html Doing a reset usually means removing it's presence from your computer in your control panel under "printer and devices" ["remove device" at top of page] and then turning it back on and reinstalling it. I suggest you download all the new software up grades for the printer before reinstalling.

Ricoh Office... | Answered on Apr 25, 2019

Steps to Fix Ricoh Printer Error Code SC899:- Start with unplugging the Ricoh printer network cable. Next, enter the service mode. Press the buttons in order as given after, [Reset] https://www.youtube.com/watch?v=ol2FUcWg08k

Ricoh Office... | Answered on Apr 20, 2019

https://www.google.com gives suggested fixes, depending upon which model of Ricoh printer. Do you know what model of Ricoh printer has this error? Use the Comment menu to add information to your questions in order to receive suggested fixes from FIXYA unpaid volunteers.


Ricoh Office... | Answered on Apr 20, 2019

  • Code: 491
  • Description:High voltage power: Drum/ development bias output error
    An error signal is detected for 0.2 seconds when charging the drum or development.
  • Causes:• High voltage leak • Broken harness • Defective drum unit or development unit • Defective high voltage supply unit

Ricoh Office... | Answered on Apr 17, 2019

That is a temperature issue with the fuser.

Ricoh Office... | Answered on Apr 16, 2019

SC500 is the main motor lock up error. Sounds like the developer has leaked out onto the drive gears and seized the developer unit. Will need replacing or stripping and cleaning.

Ricoh Office... | Answered on Apr 16, 2019

Not finding what you are looking for?
Ricoh Aficio IS420 Flatbed Scanner Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts


Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers


Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

IS Ricoh

  • IS Ricoh

Most Popular Question

need dreiver foe is420

  • Office Equipment & Supplies