20 Most Recent Ricoh Aficio IS420 Flatbed Scanner - Page 8 Questions & Answers


Yellow 107 cancel key long press sp mode enter
1
5
ok
801
memory clear
ok
execute

Ricoh Office... | Answered on Apr 13, 2019


If the message is still there after a power off then you have something physically jamming the printer. Also check the ink and any other components are properly seated in the proper locations. If it's new ink make sure you removed any protective tape.

Ricoh Office... | Answered on Apr 09, 2019


https://printcopy.info/?l=en&mod=erc&brand=Ricoh&model=Aficio%20220&code=SC402

Quoting from link:

Code
SC402

Description
Transfer roller leak error 2

A transfer roller current leak signal is detected. The current feedback signal for the transfer roller is not detected.
Causes
• High voltage supply board defective • Poor connection of the PCU • Transfer/separation unit set incorrectly • Transfer roller damaged

Ricoh Office... | Answered on Apr 08, 2019


Consequently, refilling your Aficio cartridges with aftermarket toner can save your business ... may have to replace the smart chip so the printer page count will reset and allow you to print. ... Many toner refill kits ship with the needed smart chip

Ricoh Office... | Answered on Apr 08, 2019


never do a factory reset . will wipe out all the settings so now color is off paper feed setting will be off and optics and laser unit. there are a couple of settings that you can do 5-846-50 clears hard drive of address book. 5-801-11clears network card 5-801-14 clears DCS settings and 5-801-15 clears ucs settings.

Ricoh Office... | Answered on Apr 07, 2019


https://printcopy.info/?l=en&mod=erc&brand=Ricoh&model=Aficio%20SPC242SF&code=445

Quoting from link above:

Code

445

Description

ITB (Image Transfer Belt) Unit Error
Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The ITB contact sensor does not detect the contact position of the ITB for 5 seconds after the ITB unit has moved to the contact position. ITB (Image Transfer Belt) Unit: No-contact Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit has moved to no-contact position.

Causes

Defective ITB contact motor. Defective ITB contact sensor. Defective ITB unit.

Remedy

1. Replace the ITB contact motor. 2. Replace the ITB contact sensor. 3. Replace the ITB unit.

Ricoh Office... | Answered on Apr 05, 2019


SC865 (HDD access error) is displayed when the power is turned ON, and SC819 (kernel stopped) is displayed when the power is turned OFF and ON.
Some broken files may be left in the HDD image disk space.
Repair by initializing the HDD image disk space (SP5-832-002).

Ricoh Office... | Answered on Apr 01, 2019


go in sp mode, find sp 5801 clear all memory

Ricoh Office... | Answered on Apr 01, 2019


sc 302 is Charge level output error the reason could be ?? HVPS (High Voltage Power Supply) board harness loose, broken. ?? PCU connection loose or broken

Ricoh Office... | Answered on Mar 31, 2019


This error is caused when the auto job function cancels the printing commands. This happens due to a command error.
· Another reason behind the cropping of this error is when there is a mismatch between the printer's settings and the printer driver's settings. This can happen in when the Auto continue settings are enabled on your Ricoh printer.

Printer computer support number +44 2038807918 representatives are 24 hours a day, 7 days a week and 365 days a year available there to assist you and provide to best solution across the globe. All the engineers of Printer computer support have several years of experience in this field, and they use their skills and experience to solve your issues. If you need further assistance, just call Printer support number to get an instant solution with 100% satisfaction.

https://printercontactsupport.co.uk/ricoh-printer-support/

Ricoh Office... | Answered on Mar 28, 2019


SC992-00

An error not controlled by the system occurred (the error does not
come under any other SC code).

Software defective
Turn the machine power off and on. The machine cannot be used
until this error is corrected.
Re-install firmware

So try flash firmware. tell me if you need help for that

Ricoh Office... | Answered on Mar 27, 2019


E7 - The machine has run out of the toner - Replace the print cartridge

Ricoh Office... | Answered on Mar 26, 2019

Not finding what you are looking for?
Ricoh Aficio IS420 Flatbed Scanner Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

IS Ricoh

  • IS Ricoh

Most Popular Question

need dreiver foe is420

  • Office Equipment & Supplies
Loading...