20 Most Recent NEC MobilePro P300 Pocket PC Questions & Answers


java.applet(PersonalJava only), java.awt and sub-packages, java.beansjava, iojava.lang and sub-packages, java.lang.reflect, java.math, java.net, java.rmi and sub-packages, java.security, java.sql, java.text

NEC MobilePro... | Answered on Oct 02, 2018


The P300 has 3 kinds of reset mechanisms, 1. Soft Reset: you can keep all DRAM data. Procedure: Push the Reset button 2. Hard Reset/Save SDRAM -- Use hard reset/save SDRAM mode to reset the MobilePro P300 without losing the data in SDRAM. Use this mode if the safe software reset mode doesn't improve system operation. Procedure: Reset Button and Power Buttons at the same time. 3. Hard Reset/ Clear SDRAM: You will lose all data. Use to reset the MobilePro P300 and delete the contents of SDRAM. Use this mode to reset the MobilePro P300 to its factory defaults. This is also referred to as a hard reset/clear SDRAM. **Caution** This procedure will delete all user installed applications and user data. If necessary, back up your data before performing the hard reset. Procedure: Push the Reset, Power, and Record Buttons at the same time

NEC MobilePro... | Answered on May 15, 2017


Try looking at your manual , on reciting info..god luck

NEC MobilePro... | Answered on Oct 02, 2012


hold reset.

NEC MobilePro... | Answered on Mar 22, 2012


Make sure the P300 has completed the boot process before attaching the PC Card Expansion Jacket. This will ensure proper detection.

NEC MobilePro... | Answered on Nov 24, 2010


check out the settings

NEC MobilePro... | Answered on Nov 23, 2010


Hi

What is the memory capacity of the card? if its more than the required sd card memory capacity compatible for the phone it may not read it. normally this phone supports up to 1gb sd card

NEC MobilePro... | Answered on May 11, 2009


i want a password

NEC MobilePro... | Answered on Apr 15, 2009


back light wont need to be replaced most likely, tighten the connections. yes the manufacturer can replace them you could too if u had the skill, money, and time,

NEC MobilePro... | Answered on Jun 13, 2008


You can prevent this issue by making sure the P300 is turned on before putting it in the cradle. This is limitation of the current operating system.

NEC MobilePro... | Answered on Sep 15, 2005


The Pocket PC 2002 software allows you to transfer files over to the MobilePro P300. Please look under "Synchronization" in the Getting Started Guide for details on your particular situation.

NEC MobilePro... | Answered on Sep 15, 2005


Support can be found on the NEC Computers website, by calling NEC at 1-800-632-4525, or by contacting some of our software partners at the following locations: HTTPMicrosoft: www.microsoft.com/mobile/pocketpc Insignia(Java VM): www.insignia.com/products/qa.asp Arcsoft(PhotoBase): www.arcsoft.com/support Westtek(ClearVue): www.westtek.com/support.htm Ruksun(Voice Messenger Force): www.ruksun.com/mobile_computing/windowsce/faq.html ZioSoft(ZioGolf): www.ziosoft.com/html/top/faq_ziogolf2.html Cicsosoft(Golfwits): www.golfwits.com/support/golfwits-faq.asp Packet Video(PV Player): www.pv.com/uMobilePro P300te/faq.asp

NEC MobilePro... | Answered on Sep 15, 2005


At this time there is no blue tooth option from NEC. There are third party venders (Socketcom.com) that have a CF blue tooth card. NEC will have a built-in Blue tooth model Q2 CY02.

NEC MobilePro... | Answered on Sep 15, 2005


It is estimated that you will have a few days to recharge your battery if the battery is exhausted.

NEC MobilePro... | Answered on Sep 15, 2005


SD is approximately 1/2 the speed of CF, but the benefit is that SD uses almost 1/2 the power consumption of a CF card. Additionally, it leaves the CF slot available for different I/O cards.

NEC MobilePro... | Answered on Sep 15, 2005


There are a number of things to check: * You should first make sure that the PC that you are synchronizing with has an IR port. * If you have Palm software loaded, you should disable it. * If your PC has an IR port, then you should verify that the Microsoft ActiveSync software settings are correct. To do this you open the Microsoft ActiveSync window on your desktop and go to File --> Connection Settings and verify that the box that allows infrared connection is checked and the IRDA is selected. * Change the angle of the unit and make sure that there is nothing interfering with your signal. * Try removing the LCD protection cover.

NEC MobilePro... | Answered on Sep 15, 2005


Change the angle of the unit and make sure that there is nothing interfering with your signal. Try removing the LCD protection cover.

NEC MobilePro... | Answered on Sep 15, 2005

Not finding what you are looking for?
NEC MobilePro P300 Pocket PC Logo

Popular Tags

55 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Steven Wander
Steven Wander

Level 3 Expert

594 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MobilePro NEC

  • MobilePro NEC

Most Popular Question

nec mobilepro p300 sd card

  • Computers & Internet
Loading...