20 Most Recent
Questions & Answers
What cord do I need to purchase to connect a JVC GR-DVL305 camcorder to a VCR or Mac Computer?
The GR-DVL305 should have come with a composite AV cable (a 3.5mm jack to 3 RCA plugs). On the VCR you would need a composite input or possibly a scart input. If you have a scart input you would need a convertor from RCA to Scart (available from Amazon etc.). If you want to connect the camcorder to the Mac it would depend on what Mac. Your Mac may have a FireWire input. If so you can but a firewire cable to connect the JVC to the Mac, but and it's a big but (!) Firewire is not a plug and play system like USB. You will also need software on the Mac that can take the analogue signal from the camcorder and convert it to digital.
Hope that helps.
on Sep 12, 2019
How do I get a jvc camcorder out of safeguard mode. Error 06
Look at the camcorder's display to identify if it is in Safeguard Mode. If its display indicates an error number of E01 to E06, your camcorder is in Safeguard Mode.
Disconnect your camcorder from its power source and remove its battery by sliding the latch forward and sliding the battery down while pulling it away from the camera's body. Wait at least two minutes before continuing.
Remove the camera's cassette by pressing the "Eject" button, waiting for the cassette door to open, and lifting it out of the tape bay. This step is only necessary if the camera indicates the E03 or E04 error code or it tells you to eject and reinsert the tape.
Replace the camera's battery, power connection and cassette, and turn the camera on.
on May 29, 2019
Not finding what you are looking for?