20 Most Recent Integra Dtr-7.1 Av Receiver Surround Sound Home Digital Theater Receiver Remote Questions & Answers


If you have a volt meter you may try and repair it yourself. First however disconnect the speakers and see if the set still goes into protect. If so you may have shorted output and drive transistors. There will be open resistors near them as well. You can compare the bad channel with a nearby working channel since normally only channel shorts out at a time. Always replace outputs in pairs since they in push pull configuration .

Integra Dtr-7.1... | Answered on Dec 15, 2015


http://www.integrahometheater.com/faqs.php Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Integra Audio... | Answered on Jul 03, 2018


You have a defective processor pcb assembly and it must be changed.

Integra Audio... | Answered on Feb 19, 2015


You will have bad output transistors, a $124 to 150 repair in shop service

Integra Audio... | Answered on Feb 19, 2015

Not finding what you are looking for?
Integra Dtr-7.1 Av Receiver Surround Sound Home Digital Theater Receiver Remote Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Integra Audio Players & Recorders

  • Integra Audio Players & Recorders

Most Popular Question

dtr 7 1 integra receiver goes into

  • Audio Players & Recorders
Loading...