Lexmark X75 All-In-One InkJet Printer - Answered Questions & Fixed issues


Hi Keith was the replacement fuse good to go has it blown again. more info and update please Steve, PSU should not be serviceable but with the correct tools and knowhow... .
I the new fuse was good (Tested on a low watt table lamp) then there is most likely a short in the X75.
Regards David

Lexmark X75... | Answered on Dec 25, 2017 | 52 views


you should be able to get the driver kit from www.lexmark.com under the customer support tab. use drivers/downloads item.
good luck

Lexmark X75... | Answered on Mar 08, 2015 | 25 views


When I try to print, a notice appears that the printer spooler serviceing is not working.How can I solve this problem?

Lexmark X75... | Answered on Mar 08, 2013 | 527 views


I regret to inform you that the Lexmark X75 does not support Windows 7. It works on Windows XP and previous versions.
You may contact Lexmark Technical Support Center to check for other options.

Lexmark X75... | Answered on Feb 21, 2012 | 73 views


on lexmark.com they should have the install drivers for your printer. As well as the instructions. I hope that helps you

Lexmark X75... | Answered on Feb 01, 2012 | 94 views


Please go through the following checklist to identify and fix the problem:
  • Make sure the power cord is plugged in securely and directly to the power outlet. Power surge protectors can draw power away from the printer.

  • Disconnect the power cord from the power outlet and the back of the printer and then reconnect it.

  • Check the power supply box (if there is one) to see if it is warm or cold, as there could be a defective power supply issue.

  • If there is access to a voltmeter, test the power supply to ensure that it registering the correct amount of voltage (most Lexmark printers have a 30Volt output).

  • Make sure the correct power supply is connected to the printer.

Lexmark X75... | Answered on Dec 29, 2011 | 31 views


Please visit the Lexmark website to download or view the Lexmark X74-X75 User's Guide.
I hope this information has been helpful. Thanks.

Lexmark X75... | Answered on Dec 29, 2011 | 41 views


The flashing light could indicate either a communication problem between one of your cartridges and the printer, a short in one of the cartridges, paper jam or the cartridge carrier has stalled. Please follow the steps below to fix the problem:
  1. Remove the sheets of paper from the feeder. Make sure there are no foreign objects or debris in the feeder.
  2. Open the printer cover and remove both the cartridges.
  3. While the cover is open, ensure there are no paper jams and the cartridge carrier is free from obstructions.
  4. Close the printer cover.
  5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
  6. When the printer turns on, reinsert one cartridge first.
  7. Close the printer cover and check the light status.
  8. If light on printer is normal, open the printer cover and reinsert the other cartridge. Check the light status.
  9. Replace whichever cartridge is causing the light to flash with a new cartridge. You can also try to insert a different known working cartridge to determine if the other is faulty.
  10. Load some paper. Try to print a document again to verify that the problem is fixed.

Lexmark X75... | Answered on Dec 29, 2011 | 40 views


In this case it is either a faulty print head..or it is just a mater of changing the cartridges...Usually if the printer was not used for a long period of time ..(2 weeks or more) ...the cartridges goes dry and this will be the result...-blank printing ...The easy way to solve it ...is changing them with new and genuine ones...or ..if you use refilled ones..try to insert air with a syringe ..into them so that they will mix..and also ...fill them again and agitate ...In the moment when they will leave a good mark when pressed on a paper ..(1 cm ink mark ...about 2 mm wide)..it means they will work ..Also try to reset the ink counter when you put them back ...(it may be in error )

Lexmark X75... | Answered on Nov 21, 2011 | 47 views


Run the driver from the disk by clicking on the execution file ..or running the auto-installation ..and only attach the printer when it asks or after the driver is installed ..
Or ...plug the printer...and let the wizard start ..select not to look for the driver on the net ..but to select it from a location ...click the case that will alow to browse for a location ..and point the search to the disk drive ..and click next ..this way you will force windows to install the driver for it ..
If on the disk are several drivers for more than one operation system ..you will have to select when browsing the driver folder and specify the xp one ..

Lexmark X75... | Answered on Nov 19, 2011 | 28 views


the driver is still available for free download on the support site ..but the issue with this printer is that it do not have any drivers for windows vista and windows 7 ..The only available drivers and software on the site are for windows xp and older ..So ..if you want to use it you will need to attach it to a widows xp computer ...I know for sure cause I encountered this issue before and looked for drivers a long time without solution ..
You may try to run the driver in compatibility with windows xp in vista or 7 ..but this will require to change its properties and will have no warranties will work ....
here is the support site and downloads available for xp ..
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X75&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Lexmark X75... | Answered on Nov 19, 2011 | 41 views


You have to install the driver and software for it ...
here is the support site for the printer ...and if you get there you will have to download and install the driver for your operation system ...make sure they have the driver for yours...If they do not have it ..it means the printer is not compatible with the operation system ...you may try to run it in compatibility with the operation system it was made for ..but there are no warranties it will work ...
here is the support site ..
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X75&segment=SUPPORT&userlocale=EN_US&frompage=null#1
here you will be able to find the driver and software..but for xp maximum ...If you use vista or windows 7 ..it may be a issue ..

Lexmark X75... | Answered on Nov 18, 2011 | 19 views


Make sure that you are inserting only genuine Lexmark cartridges in your printer. Removing then re-inserting the color cartridge into the printer is a quick to minor cartridge communication issues.
Make sure that your color cartridge still has substantial ink level for printing using the Lexmark Solution Center software on your computer.
Click Start > Programs > Lexmark X74-X75 > Lexmark X74-X75 Solution Center. Check the ink levels.
If color ink level is still good, then it probably just needs some cleaning. Print quality issues can be due to dirty or clogged print cartridge nozzles. From the Maintenance tab in the Lexmark X74-X75 Solution Center, click Clean print nozzles to fix horizontal streaks. Your printer will then print a test page. Try to print a color page again to verify that the problem with the blue color is fixed.
If the problem continues, try to insert a different known working color cartridge to identify if it's a faulty cartridge issue.

Lexmark X75... | Answered on Oct 26, 2011 | 132 views


Please visit the Lexmark website to download and install the Lexmark X74 - X75 printer driver on your computer. Select your operating system > click on FILTER> download and execute the file. Simply follow the instructions on your computer screen.
I hope this information has been helpful.
Should you still need assistance, please leave a comment to my response and I'll get back to you.

Lexmark X75... | Answered on Oct 17, 2011 | 89 views


I regret to inform you that the Lexmark X75 printer is not compatible with Windows Vista operating system. It works on Windows XP and previous Windows versions only.

Lexmark X75... | Answered on Sep 23, 2011 | 45 views


I regret to inform you that the Lexmark X74-X75 All-In-One printer is not compatible on Windows 7 operating system. Please contact Lexmark Technical Support Center for other options.

Lexmark X75... | Answered on Sep 02, 2011 | 155 views


  1. Make sure the printer is switched on, the old cartridges are still in the printer, and the cartridge cover is closed.
  2. Click on Start, Programs (XP: All Programs), Lexmark <Printer Name>, Lexmark <Printer Name> Solution Center.
  3. When the Solution Center screen appears, click on the Maintenance button on the left-hand side. (This button is the third from the top and bears a picture of ink drops.)
  4. When you see the Install or obtain a New Cartridge option, click on it once. A pop-up displays a brief description of how to physically remove an old cartridge and install a new one.
  5. Follow these instructions and click Next. The software will prompt you to confirm whether the cartridges are new or old.
  6. For the new cartridge you just inserted, select No, it's new. Important: Make sure the setting for any old cartridge stays on Yes, It is old.
  7. Once your selections have been made, click OK. The program will want to run the alignment for any new cartridges you installed. This applies whether you changed one or both cartridges (in the case of printers that can hold two cartridges). An alignment screen with a red and white bull's eye will appear.
  8. Make sure the cartridge cover is closed and that there is paper in the printer.
  9. Then click the Print button on the alignment screen. A sheet of paper will print from your printer with a series of arrows and numbers on it, with one set of solid bars above them. You should see four groups of lines, unless you have a single cartridge. If you have a single cartridge, you will only have one set of lines.
  10. In each group, locate the arrow that looks the most solid. It may help to circle the number under each arrow you choose as you go along.
  11. On your screen, you will see an area where you can enter the alignment values. When you have identified all the numbers, select those same numbers for each group on your screen, using the up and down arrows next to each value for A, B, C, and D (or A if you have only one cartridge).
  12. When all the numbers have been changed to reflect the chosen numbers on the printed alignment page, click OK. The cartridge installation procedure is complete.
  13. You can now exit from the Solution Center.

Lexmark X75... | Answered on Aug 31, 2011 | 161 views


Please follow steps below to identify the cause of the problem and fix the issue:

1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.



If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X75... | Answered on Aug 24, 2011 | 25 views


You can download the drivers from here:
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X75&segment=SUPPORT&userlocale=EN_US&frompage=null#1
(Select Operating System, then click filter and download the driver)

Lexmark X75... | Answered on Aug 18, 2011 | 28 views


Hi jpcarvalhofr
There no direct solution . You need to use Windows XP or install a virtual version of XP on your machine .
Best regards ,
fanaudi

Lexmark X75... | Answered on Aug 10, 2011 | 80 views

Not finding what you are looking for?
Lexmark X75 All-In-One InkJet Printer Logo

397 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...