20 Most Recent Lexmark X4250 All-In-One InkJet Printer Questions & Answers


Please visit the Lexmark website, www.lexmark.com Support or Driver and Downloads.

Search by using the printer model and operating system that you need the driver for.

If you do not see a driver for the printer, then more than likely Lexmark has made a decision that the technology in the printer no longer matches up with the current demands of both software and hardware.

Don

Lexmark X4250... | Answered on Nov 13, 2018


Try this. http://support.lexmark.com/index?page=content&productCode=LEXMARK_X4270&segment=SUPPORT&userlocale=EN_US&id=HO2622 When you take the cartridges out, clean thoroughly the contacts and see if there is any residue from the label that is removed or dirty contacts.

Lexmark X4250... | Answered on Sep 11, 2014


I had a similar problem with my HP 3650. I can install my printer on windows XP but not windows 7. I had to download the drivers compatible with windows 7 for the printer on the internet,

Hope this will help

Lexmark X4250... | Answered on Feb 29, 2012


Contact Lexmark and Get the Scanner Replaced if its Under Warranty as the Flat Bed Scanner is not working Fine and its Malfunctioning

Lexmark X4250... | Answered on Oct 05, 2011


It could be the fax line in the wall. Try to insert a telephone straight to the wall and listen for a dial tone. If you hear no dial tone, please contact your phone company and have them check the line. If you hear a dial tone, re-plug the printer into the wall using a different known working telephone cable. Try to fax again.

Lexmark X4250... | Answered on Sep 02, 2011


Hi

Please check you fix the cartridge is properly and with right place (Black to Black) (Color to Color)

Lexmark X4250... | Answered on May 12, 2011


click here and download the drivers.. 

Lexmark X4250... | Answered on Mar 10, 2011


The "1200" error message can be caused either by the cartridges that are not snapped in correctly, the encoder strip (transparent strip) is not in its position or something is blocking the cartridge carrier path. Please refer to this article in the Lexmark website on 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One. If problem continues, please contact Lexmark technical support for additional assistance. Thanks.

Lexmark X4250... | Answered on Mar 08, 2011


Sorry, but Lexmark does a check on the color cartridges before printing. Even if you are only printing in B/W, the printer will refuse to work without color cartridges installed and full of ink.

Lexmark X4250... | Answered on Feb 28, 2011


Sometimes, it take awhile for the ink to reach completely into the printhead.
Perform a printhead cleaning cycle should correct the problem.

Lexmark X4250... | Answered on Feb 14, 2011


Hello thanks for using Fixya

The error 1203 is a cartridge error. It
is an issue that occurs either when a cartridge is bad or the printer cartridge slot is bad
To solve it try this. This solution works
  • Try cleaning the copper contacts of the both carts and cart slot in the printer and try again OR
  • When error shows up, Turn the printer to Power Off. Wait one minute and turn it back on.
Your problem will be solved.
I hope this solution will helpful 4 u
Please don't forget to click on Four thumbs which are given below & then write testimonial in your words for appreciation if it is helpful
THANKS & Keep Using fixya

Lexmark X4250... | Answered on Jan 28, 2011


The power adapter for your Lexmark X4250 may not be available in retail stores. I would suggest you contact Lexmark technical support for assistance. Thanks.

Lexmark X4250... | Answered on Dec 13, 2010


The error 1203 is a cartridge error. The cartridge either went bad or you might have bought a bad one. Try turning the power off and unplugging the printer. Then reseat the cartridges. Then plug the printer back into the wall outlet ( do not use a power strip) turn the printer back on. If the issue is still there then try removing and reinstalling the cartridges with the power on. If this still doe not correct the issue try a different cartridge.


Hope this helps..

Best of luck..

Lexmark X4250... | Answered on Nov 19, 2010


go to Lexmark - United States and search for the manual.

Lexmark X4250... | Answered on Oct 23, 2010


Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...
1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Lexmark X4250... | Answered on Apr 25, 2010


Turn off power to the printer and unplug it from the back of the printer.
Insert the power cord back into the printer. You will hear some clicks and motors moving. Pull out the cord again when this happens.Open the cartridge bay by pulling the face forward and lifting the bay door up. The cartridge carousel most likely will not come to the center.By trying physically pulling the carousel to the middle (NOT BY THE RIBBON CABLE) ,if you can not pull it to the middle push it far right as possible. Listen for a click.
After pushing to the right and hearing a click you should then be able to pull the carousel towards the middle easily. Remove the ink cartridges and power up the printer again.You will receive an error along the lines of black cartridge missing. Open the bay, insert the cartridges, close the bay.Your problem is fixed.

Lexmark X4250... | Answered on Apr 25, 2010


Hi,
You can download the required installation drivers and software from manufacturer's site by clicking this link
On the page which opens, select and download the drivers according to the operating system (Windows XP/Vista,Windows 7) of your computer.
Hope this solves your problem. Thanks for using FixYa.

Lexmark X4250... | Answered on Feb 02, 2010


Hi you can try see if this works
Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Lexmark X4250... | Answered on Jan 30, 2010

Not finding what you are looking for?
Lexmark X4250 All-In-One InkJet Printer Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

need lexmark 4126

  • Office Equipment & Supplies
Loading...