20 Most Recent Kodak EasyShare Thermal Photo Printer Questions & Answers


To resolve this error:
  1. Disconnect the power adapter from the printer.
  2. Wait 30 seconds to allow the printer to reset.
  3. Connect the power adapter to the printer. Turn on the printer, if necessary.
  4. for more help visit https://cbrtechsolutions.net

Kodak EasyShare... | Answered on Sep 24, 2015


The easiest way to get the cable is to type in Kodak Easyshare in googles search. You will find a link that says Shopping results for..... Click on it, a whole mess of places to by the cable for around 3 dollars will show up. Clink on anyone of them to take you to the page to get to the seller of the cable. For the price I would probably avoid any ebay auctions and go with a direct purchase from like Buy.com.

Anyway good luck and I hope this helps you out.

Kodak EasyShare... | Answered on Jul 22, 2011


I would presume it would be Kodak. Google will point you to their website.

Kodak EasyShare... | Answered on Dec 25, 2010


the answer is yes, but can you find someone to do it, also before it failed to pick up, how was it printing, hopefully well, if not, and only printed on left side of paper, then it might be time for replacement, since i do not know if anyone can repair that problem, its a little tricky to repair, parts are not sold to repair, but that can be repaired.

Kodak EasyShare... | Answered on Sep 25, 2010


reviews.cnet.com/...photo-printers/easyshare-printer-dock.../4505-13252_7-30471124.html

Kodak EasyShare... | Answered on Aug 02, 2010


If you are getting "yellow streaks", run the Kodak "print-head-cleaning" software, to see if that helps.

Be sure to compare the cost of "repairing" the printer to that of buying a new printer (that would use the same ink-cartridges).

Kodak EasyShare... | Answered on Jul 03, 2010


Welcome to Fixya
  1. Make sure the printer is on
  2. All Cables and power cord are Properly Plugged in
  3. Software/Driver Installed Properly
  4. Check that the USB cable is securely connected to the printer and the computer.
  5. Verify that the printer is receiving power and that the paper tray is inserted fully into the printer.
  6. Restart the computer.
Also Follow this Instructions..
  • Step-by-Step Solutions and Repair Click here[Select your Steps and Do Steps and Answer Questions accurately]
  • How install a new printhead in my all-in-one printer Click here
I hope you got an idea...Thanks for Contacting Fixya

Kodak EasyShare... | Answered on Jun 28, 2010


Hi,

Please provide the model no. of the product in order to give the exact answer.

Kodak EasyShare... | Answered on Apr 12, 2010


Hello,

one way or the other, someone must have change some settings on the Kodak EasyShare printer unknowing to you.

Since you do not know want was pressed to have caused this, the it would be better if you reset the printer. resetting will put the printer back to its default state. This will make the printer work fine as it has been doing before.

Or uninstall and reinstall the printer drivers. That is, detach the printer cord from your computer, uninstall the Kodak EasyShare printer dock Series 3 software, restart your computer and reinstall the software back just as you did when you first installed the printer to your computer.

This will help to rectify this problem.

Good luck.

Kodak EasyShare... | Answered on Apr 12, 2010


Hi,

you're not completely right. Kodak printer docks normally only charge the Kodak KAA2HR battery pack. It not charges normal Ni-MH rechargeable batteries of any brands.

Kodak EasyShare... | Answered on Mar 18, 2010


Try printing a testpage just press print + cancel and make sure you have a paper loaded

Kodak EasyShare... | Answered on Dec 29, 2009


Hi

Thanks for using FixYa. This can be caused by a number of things:

The fuser
The ETB
The toner cartridge
The firmware
The printer needs a cleaning.
The slot in the printer.
Incorrect Media.

Try cleaning the printer, use a lint-free cloth for the ETB, DO NOT touch the belt with your fingers, the oil from fingers will often make things worse. Always use a lint-free cloth, if you ever encounter dirt inside the printer, dampen the cloth.

Calibrate the printer. From the printer's control panel menu Configure Device-> Print Quality-> Calibrate now. (Press the Checkmark key to advance through menus).

To check if the issue is with fuser put a sheet of paper in the manual feeder in the front of the ITB drawer. Print a configuration page and when the back edge of the paper reaches the bottom of the feeder, open the back of the printer to stop the printing. Now open the ITB drawer and look at the unused sheet and see if the defects are present. If they are still there then it is not the fuser. If the defects are gone, then it is the fuser. You’ll need to replace it.



Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks

Rylee

Kodak EasyShare... | Answered on Dec 22, 2009


check paper setting

Kodak EasyShare... | Answered on Nov 26, 2009


No. C-series camera and V-series haved their own specification and features. C300 and other Cseries camera is almost the same the only difference is some has high mega pixel some are HD features.

Kodak EasyShare... | Answered on Nov 08, 2009

Not finding what you are looking for?
Kodak EasyShare Thermal Photo Printer Logo

Popular Tags

60 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EasyShare Kodak

  • EasyShare Kodak

Most Popular Question

printer will not paper from tray

  • Office Equipment & Supplies
Loading...