20 Most Recent Icom IC-M505 - VHF/DSC Marine Transciever - Page 3 Questions & Answers


Can you please provide the actual model that you are using so that I can check up on how it works.

Icom Radio... | Answered on Apr 19, 2018


No. Each radio is designed for the country of use and built at the factory that way. Cheaper to buy a new radio.

Icom Radio... | Answered on Mar 21, 2018


I am not ham radio savy
But this guy on the you tube video below seems to be computer and ham radio savy
https://www.youtube.com/watch?v=Q6xfsfpWIUw

Icom Radio... | Answered on Mar 14, 2018


AT-180 ATU is not intended for IC-7300. Icom IC-7300 have a built-in tuner already. maybe you can use a special cable or interface to use the AT-180 on IC-7300.

Icom Radio... | Answered on Mar 04, 2018


If the radio is made to be sold only in the US then the phase lock loop is disabled when your are trying to transmit out of the US band edges. Try looking up a MARS circuit mod for this model and it amounts to only clipping one end of a diode to enable the transmitter on all frequencies.

Icom Radio... | Answered on Jan 27, 2018


If it can receive some signals that are close to you, then the RF front end protection diodes are likely shorted. This would require someone with expertise in surface mount components to repair. Take it to a dealer and have them look at it.

Icom Radio... | Answered on Jan 27, 2018


It could be that you have a power supply problem as it seems to be that way with both radios. Linear power supply pass transistors fail quite often. Switch mode power supplies aren't much better. Their electrolytic capacitors are quite often defective.

Icom Radio... | Answered on Jan 27, 2018


I suggest you post this question on a Ham Radio web site.

Icom Radio... | Answered on Jan 26, 2018


It sounds like the grease lubricating the shaft has hardened. OR, as I have read elsewhere, the shaft may have been bent. You may need a new encoder but first, I would try a bit of Isopropyl alcohol to soften the grease.

Icom Radio... | Answered on Jan 10, 2018


Check Microphone settings and ensure volume indicator moves up and down when you speak into it.

Icom Radio... | Answered on Jan 08, 2018


Go to https://www.mods.dk/manual.php?brand=icom and look up the service manual. All the info is there.

Icom Radio... | Answered on Nov 07, 2017


When a device or appliance doesn't behave as per the instructions there is little doubt that it is faulty.

Whether the item should be repaired or replaced depends on various factors, though it is worth contacting the manufacturer in case there is special advice they can offer.

Icom Radio... | Answered on Oct 21, 2017


uk-repair.com/repair/hard-reset/icom-radio-marin-ic-ssb-m802/369/6891.html


Try this site

Icom Radio... | Answered on Oct 18, 2017

Not finding what you are looking for?
Icom IC-M505 - VHF/DSC Marine Transciever Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Icom Radio Communications Experts

Perry Mellott
Perry Mellott

Level 2 Expert

147 Answers

Robert McClure

Level 2 Expert

161 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you an Icom Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Icom Radio Communications

  • Icom Radio Communications

Most Popular Question

icom ic m505 refuses scan in setup

  • Radio Communications
Loading...