20 Most Recent Icom IC-M505 - VHF/DSC Marine Transciever - Page 4 Questions & Answers


Answer is yes.
Look up your local Icom dealer.
They mostly are small communications companies (not big box stores like Best Buy etc) used to dealing with commercial customers but happy to see personal walk in customers too.
I would expect charge for basic programming to be around $50 - $60.
Regards
John

Icom Radio... | Answered on Aug 26, 2017


Good info posted by Mike Nadeau - N1EQ

http://www.n1eq.com/icom-ic-746756pro-series-failure-of-remoteci-v-port/

Icom Radio... | Answered on Aug 26, 2017


Hi Yanielki,
You want to interface a IC-A110 mic with what other piece of equipment?
Are you looking for a wiring diagram?
What's the problem?
Explain more and myself and plenty others would be happy to help.
Regards,
John

Icom Radio... | Answered on Aug 26, 2017


Sorry we have no way to look this up.

Icom Radio... | Answered on Jun 22, 2017


Hello,

You will need the service manual to be able to do this and you will also need to purchase a 150 ohm carbon film resistor (no wire wound resistors) to simulate a 3:1 SWR to reset the onboard auto tuner base line for SWR. I believe you may find a service manual on BAMBA's website to download for free. The auto tuner is factory set to work up to a 3:1 SWR before it gives up trying to match the antenna. So, this is a resistor you will need or make up a 150 ohm load using a combo of resistors as long as they are not wire wound types. 73, Dennis

Icom Radio... | Answered on Apr 19, 2017


I usually replace all of my radio lamps with Ultrabright LEDs. They come in many different colours and usually fit the same mounting hole as the incandescent lamps. They will need a current limiting resistor in one of their leads, 2200 ohms to 4700 ohms at 1/4 watt works well. Leds are polarized so make sure that you get the polarity correct. Leds are also about 1/10 the cost of a similar incandescent bulb.

Icom Radio... | Answered on Dec 09, 2016


Here's a FREE software program for your ICOM. It is called CHIRP... just google it. I use it a lot.... chirp.danplanet.com

Icom Radio... | Answered on Aug 12, 2016


check external speaker jack and internal speaker

Icom Radio... | Answered on Jul 11, 2016


Adjust the Squelch level

Icom Radio... | Answered on Jul 11, 2016


Check PTT when you press it it must ground PTT voltage if it not ground the voltage then replace the PTT switch.

Icom Radio... | Answered on Jul 11, 2016


See in programming and enable usb function.

Icom Radio... | Answered on Jul 11, 2016


Most, if not all FM radios can have their deviation adjusted. Some times it is an internal pot, other times it is a menu adjustment. If this is a marine radio, the deviation may now have been reduced intentionally for the marine VHF bands, following the new VHF FM mobile regulations. ALSO, if it is a marine radio, only a qualified service center should adjust the radio.

Icom Radio... | Answered on Jun 19, 2016


possibly a bad final

Icom Radio... | Answered on Feb 11, 2015


I'd contact Icom, if its under warranty get it fixed

Icom Radio... | Answered on Feb 11, 2015


it'd be cheaper & less of a hassle just to buy an ham product

Icom Radio... | Answered on Feb 11, 2015

Not finding what you are looking for?
Icom IC-M505 - VHF/DSC Marine Transciever Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Icom Radio Communications Experts

Perry Mellott
Perry Mellott

Level 2 Expert

147 Answers

Robert McClure

Level 2 Expert

161 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you an Icom Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Icom Radio Communications

  • Icom Radio Communications

Most Popular Question

icom ic m505 refuses scan in setup

  • Radio Communications
Loading...