20 Most Recent
Questions & Answers
I have copier xerox 5021 error is 092-910 what does it mean
That error is an ATC failure. It can be caused by a bad drum or MCU Board. You can first try clear the value of NVM [752-059] (ATC Fail) or NVM [752-060] (ATC Fail Continuous Count) to '0'. Enter Diagnostics, Press and hold the  key on the Control Panel for 4 seconds or longer and then press
the [Start] button while keeping your finger on the  key.
Password is 6789. And go to NVM Initialize.
What could be the problem when Xerox workcenter 5335 shows " A system error has occurred." error o16-322
The accumulated accounting data in Job Based Accounting reached the specified value.
- Switch the power off then on 2 minutes after the job is attempted (after an external Accounting Server has read the accounting data).
- If the problem persists, have the customer perform a manual retrieval of machine data from their Accounting server.
- If the problem persists, perform Initialize Hard Disk and then have the customer push the User Accounts to the machine from their Accounting server.
- Ensure that the customer is programming a job within the parameters of the machine utilizing the UI.
on Jul 26, 2019
Not finding what you are looking for?