20 Most Recent Sunpentown SPT SU-2550P Ultrasonic Humidifier with Fragrance Diffuser, Cool Mist, Super Quiet and comes with Night Light, Pink color, Covers up to 450 sq ft Questions & Answers


Yes. :)

We are a Generator Parts Specialists. We have a whole Help Center and Engineers dedicated to helping people fix their Portable Generators. In addition to this we have a "Parts Search Service" if the part is not listed on our site. Check us out on our site. https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery

image-2fwsrbehqcya13uxwt41l5dc-2-2.jpg

Electrical... | Answered Yesterday


We are a Steele Generator Parts Specialists. We have a whole Help Center and Engineers dedicated to helping people fix their Portable Generators. In addition to this we have a "Parts Search Service" if the part is not listed on our site. Check us out on our site. https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-5-0_8.jpg

Electrical... | Answered Yesterday


Hi!

We are a Steele Generator Parts Specialists. We have a whole Help Center and Engineers dedicated to helping people fix their Portable Generators. In addition to this we have a "Parts Search Service" if the part is not listed on our site. Check us out on our site. https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery

image-2fwsrbehqcya13uxwt41l5dc-5-0_7.jpg

Electrical... | Answered Yesterday


We have a whole Help Center and Engineers dedicated to helping people fix their Portable Generators. In addition to this we have a "Parts Search Service" if the part is not listed on our site. Check us out on our site. https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery

image-2fwsrbehqcya13uxwt41l5dc-5-0_5.jpg

Electrical... | Answered Yesterday


Hi!

We sell this fuel petcock: https://www.generatorguru.com/fuel-valve-petcock-78317950/

If you need any other parts: https://www.generatorguru.com/sc960/

We also have a whole Help Center and Engineers dedicated to helping people fix their Portable Generators. In addition to this we have a "Parts Search Service" if the part is not listed on our site. Check us out on our site. https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery


https://www.generatorguru.com/fuel-valve-petcock-78317950
image-2fwsrbehqcya13uxwt41l5dc-5-0_6.jpg

Electrical... | Answered Yesterday


Most of the time it is either the Capacitor or AVR that has blown. Check out our videos on how to test them.
We hold a full range of Generator AVRs and Capacitors.
https://www.generatorguru.com
We have a whole Help Center dedicated to helping people fix their Portable Generators. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_12.jpg

Electrical... | Answered Yesterday


Likely the carburetor float has stuck open or there is debris in the fuel tank that has lodged in the carb needle valve.

Try adding an inline fuel filter, remove carb bowl/float and clear/clean fuel needle valve.

Electrical... | Answered Yesterday


We hold parts for your Generator and have a whole Help Center dedicated to helping people fix their Portable Generators. If the answer is not there, we have Generator Engineers who can help. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-5-0_1.jpg

Electrical... | Answered Yesterday


We have a whole Help Center dedicated to helping people fix their Portable Generators. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_10.jpg

Electrical... | Answered Yesterday


If you can remove it from the control panel and take a picture of the back and the wiring we might be able to match it for you. We hold parts for over 500,000 parts for over 2000 models of portable generators.
Please send the pictures to our sales team via our website .
https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_9.jpg

Electrical... | Answered Yesterday


Yes it is a DIY fix.

Most of the time it is either the Capacitor or AVR that has blown. Check out our videos on how to test them.
We hold a full range of Generator AVRs and Capacitors.
https://www.generatorguru.com
We have a whole Help Center dedicated to helping people fix their Portable Generators. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_7.jpg

Electrical... | Answered Yesterday


Most of the time it is either the Capacitor or AVR that has blown. Check out our videos on how to test them.
We hold a full range of Generator AVRs and Capacitors.
https://www.generatorguru.com
If you need help testing let us know. We have a whole Help Center dedicated to helping people fix their Portable Generators. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_6.jpg

Electrical... | Answered Yesterday


We have a whole Help Center dedicated to helping people fix their Portable Generators. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_4.jpg

Electrical... | Answered Yesterday


Hi!

Usually it is just the jet in the carb that needs changing in most High Altitude kits. To change this remove the carb bowl at the bottom. Remove the float and float needle (be sure if there is a spring not to loose it!) Then the jet will be visible where the float needle was sitting. Remove and replace with your new jet.

If you need help moreg let us know. We have a whole Help Center dedicated to helping people fix their Portable Generators and Engineers who can advise you. Check it out on our site. https://www.generatorguru.com/

Parts Spares for Generators and Small Engine Machinery
image-2fwsrbehqcya13uxwt41l5dc-1-0_3.jpg

Electrical... | Answered Yesterday


Here is the solutions for your question:

1. Measuring whether there is real electricity, the generator replaces the voltmeter.
2. Put it into automatic or manual mode.
3. Check and correct according to the circuit diagram.
4. New generators or machines that have not been used for a long time appear easily. They can be charged by charging buttons on the control screen or by 12V batteries. The positive pole is connected to F1 and the negative pole is connected to F2. If the voltage can not be established, the positive and negative poles of the batteries can be changed and retried.
5. Cleaning is the surface of the ring. The end surface of the carbon brush is sanded so that it coincides with the arc on the surface of the collector ring more than 70% and the spring pressure is strengthened.
6. Clean carbon brush and carbon brush grip make carbon brush move freely.
7. Check the forward and reverse resistance of the diode with the multimeter, such as damage and replacement.
8. Use a multimeter to check if the forward and reverse resistances do not meet the requirements of diode characteristics. If the resistance value is infinite, the multimeter 1K for diesel generator sets should be turned on. Then use one Eurometer to check if the resistance value is zero, replace or handle the windings. If the resistance value is not stable, check whether the connection of the joint is loose.

https://www.dieselgeneratortech.com/generator-set

Electrical... | Answered Yesterday


Here is the solutions for your question:

1. Measuring whether there is real electricity, the generator replaces the voltmeter.
2. Put it into automatic or manual mode.
3. Check and correct according to the circuit diagram.
4. New generators or machines that have not been used for a long time appear easily. They can be charged by charging buttons on the control screen or by 12V batteries. The positive pole is connected to F1 and the negative pole is connected to F2. If the voltage can not be established, the positive and negative poles of the batteries can be changed and retried.
5. Cleaning is the surface of the ring. The end surface of the carbon brush is sanded so that it coincides with the arc on the surface of the collector ring more than 70% and the spring pressure is strengthened.
6. Clean carbon brush and carbon brush grip make carbon brush move freely.
7. Check the forward and reverse resistance of the diode with the multimeter, such as damage and replacement.
8. Use a multimeter to check if the forward and reverse resistances do not meet the requirements of diode characteristics. If the resistance value is infinite, the multimeter 1K for diesel generator sets should be turned on. Then use one Eurometer to check if the resistance value is zero, replace or handle the windings. If the resistance value is not stable, check whether the connection of the joint is loose.

More solutions from the website:
https://www.dieselgeneratortech.com/

Electrical... | Answered Yesterday

Not finding what you are looking for?
Sunpentown SPT SU-2550P Ultrasonic Humidifier with Fragrance Diffuser, Cool Mist, Super Quiet and comes with Night Light, Pink color, Covers up to 450 sq ft Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpentown Electrical Supplies Experts

John Trevino

Level 3 Expert

1407 Answers

rlev_7

Level 1 Expert

46 Answers

Richard Lilja
Richard Lilja

Level 3 Expert

400 Answers

Are you a Sunpentown Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sunpentown Electrical Supplies

  • Sunpentown Electrical Supplies

Most Popular Question

off switch generator not working

  • Electrical Supplies
Loading...