20 Most Recent Canon MultiPASS MP390 All-In-One InkJet Printer Questions & Answers


it will need the heads cleaning. if you do not have the disk for it with maintenance on then you can do it this way. open control pannel/open printers and fax's/look for your printer model in next window/ now RIGHT click on your model and go down to "properties" and click that open ...you will find "head clean " in there . you might have to do this a few times so keep turning 1 sheet of paper around to print test page. if it wont clean them you will have to get inside with cotton buds and aftershave ( for the alcohol content) and clean them by hand. ( ink dry's up after standing and this causes it not to print )

Canon MultiPASS... | Answered on Apr 23, 2015


With the machine powered on. Just lift up on the entire top portion on the platen unit, lower the front verticle cover and the printhead should come to the correct position to change out the ink tanks, just tilt tanks towards the front of the unit and lift out.

Canon MultiPASS... | Answered on Dec 12, 2014


I had a similar problem with a Multipass F30 - check that the Canon Service "mpservice" is running. In the situation I had it was set to automatic, but the service was stopped. You can locate the Services by going to the Control Panel, then Performance & Maintenance if you are using catagory view or directly to Administrative Tools if in Classic View. Double click on Administrative Tools and then open Services. Scroll down and locate mpservice to see if it is running. I hope this helps.

Canon MultiPASS... | Answered on Jun 13, 2014


http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/multipass_series/multipass_mp390#DriversAndSoftware

Canon MultiPASS... | Answered on May 14, 2014


No free suggestions go to the authorised service centre or trying to get an live chat support from canon like I do from my hp printers

Canon MultiPASS... | Answered on Apr 10, 2014


Hold down the power button. Let the printer shut off. Turn it back on. From Windows Start button, go to Control Panel - Printers & Faxes; right-click on Canon MP390, click on Printing Preferences, open the tab for Maintenance, click Quiet Mode and choose Always Use Quiet Mode. When the error recurs, cancel all pending print jobs: double-click on the printer icon in the tool bar (bottom right corner of monitor) to open the Print Queue, click on the jobs, then press the Delete button on the keypad. After all pending jobs are deleted, power down the printer by holding down its On/Off button. After 2+ minutes, turn it back on & try again. Depending on how frequently you use the printer, you may find it's time for a replacement.

Canon MultiPASS... | Answered on Apr 07, 2013


i'm facing the same problem....pls help...tq

Canon MultiPASS... | Answered on Feb 26, 2013


Have you tried re-seating the ink cartridges? (removing them and putting them back in making sure they clicked on their place)

Canon MultiPASS... | Answered on Oct 13, 2012

Not finding what you are looking for?
Canon MultiPASS MP390 All-In-One InkJet Printer Logo

364 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2256 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MultiPASS Canon

  • MultiPASS Canon

Most Popular Question

changed cartridge but now only prints

  • Office Equipment & Supplies
Loading...