20 Most Recent
- Page 4 Questions & Answers
Cannot Remove Beater from Pedastal
well theres a couple of things you can do one is to soak the spring and ring in warm water with a dish cloth then take a butter knife and try to pry it up very carefully this usually works the other is to steam it free but that is very time consuming.
on Dec 21, 2009
Kitchen Aid Blender - blade not rotating
You will definitely need to change the clutch blade i.e. the black rubber rotating bit. Chaging it on the base unit may be difficult, I would check with your local Kitcheaid repairer for spare parts and repair advice.
Also check the clutch blade on the jug itself.
on Apr 07, 2009
Kitchen Aid Blender
There are several different control boards used in Kitchen Aid blenders. Call my store with your model # and I will give you price and availabity. 1 888 643 9806 9:00 - 5:30 Pacific time.
on Jul 18, 2008
Ninja Blender 1100 starts then stops almost immediately, is there a way to fix this?
It Could Be a Number of Things..
It's most likely that the electrical Wire Could Have a Shortage, If it cuts off again Try gently Wiggling the Electrical Wire in a Number of Directions If it cuts on and off while your fidgeting with it, you've found your Problem! A quick fix would be to Adjust the wire In the position it would cut on the strongest, wrap the cord with Tape to Keep the wire in that Position, this will Prevent it from shorting again.
Either that or you simply put too much product in the Blender with an inadequate amount of liquid.
on Oct 06, 2019
Not finding what you are looking for?