20 Most Recent KitchenAid 5-speed Blender With Glass Blender Jar Ksb565er - Page 7 Questions & Answers


Check with a small appliance repair station for parts availability.

Blenders | Answered on Mar 12, 2019


THEY WILL IF YOU NEVER USE IT .

Blenders | Answered on Feb 09, 2019


sadly we can not help you find one , check with manufacturer or look for a rubber stopper at local home improvement store

Blenders | Answered on Feb 07, 2019


There's not enough detail to help solve your issue. Can you please post the brand name and model number?

Blenders | Answered on Feb 02, 2019


Call 1-888-367-7373
Business Hours: Mon - Fri 10:00am - 5:00pm EST

Or email: help@myproduct.care

Blenders | Answered on Feb 02, 2019


I have been searching for about 30 minutes, and I reckon the company are out of business. The company headquarters were in Venezuela, but my Spanish is not that good. Nowhere appears to do spares and any reviews I find go back to around 2009.


Maillegro 9090 Immersion Blender Google Search

Blenders | Answered on Jan 14, 2019


I know this is an old, old post, but I could not find a solution anywhere, so hopefully this will help someone. We have a model 51BL25, similar to scottman55's blender, and it had the same problem. There are two separate nuts in the blade assembly. One holds the blade on, and the other holds the seal tight. When the latter gets loose, the blender shakes and leaks.
To fix it, first you have to remove the top nut holding the blade on. I had to get in there with pliers, but a ratchet with an extension would be perfect. This nut is right-handed ("normal"). Once that nut is loose, you can remove the nut and the blade. You will also want to remove the washer immediately under the blade (take note of which side goes up).
Now, you can pull the whole axle out by the wheel on bottom of the blender. This exposes a really thin, flat nut. In my case, this nut had come completely off, so nothing was really holding the seal together at all. Again, make sure you remember which direction the nut goes -- it is not quite symmetrical. That nut is what comes loose when the blender starts leaking. By the way, it is a left-handed nut, so it screws on counter-clockwise ("backwards"). Screw it in tight, then put the rest of the blade assembly back together, and your done. If you have the right tools, it should take only maybe 5 minutes.
Depending on your problem/model, this may or may not solve your problem. Hope it helps!

Blenders | Answered on Jan 07, 2019


Send it into the maker for repair or replacement.

Blenders | Answered on Dec 12, 2018

Not finding what you are looking for?
KitchenAid 5-speed Blender With Glass Blender Jar Ksb565er Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

156 Answers

eyecam

Level 2 Expert

96 Answers

Cindy Wells

Level 3 Expert

6033 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Blenders

  • KitchenAid Blenders

Most Popular Question

leaks from bottom glass jar bought new

  • Blenders
Loading...