20 Most Recent Sharp AR-M160 Laser Printer Questions & Answers


http://www.bioticaindia.com/ar-m160.html
Here is a link to a driver you can try. It is very possible that there is not a driver available that is compatible.
Thank you,
lee

Sharp AR-M160... | Answered on May 26, 2019


Clearing a trouble code on a AR-M160 is a little different than the AR160.

Try "#" "interrupt" "clear" "interupt" "1" "4" "start key"

This should clear the error. Even if you replace the fusion unit you will need this code to clear the error

Sharp AR-M160... | Answered on May 25, 2019


Below are the F2 errors and causes for Sharp AR-M160

"F2-31" Image density sensor fault
"F2-32" Drum mark sensor fault
"F2-33" Grid voltage correction problem
"F2-35" Grid voltage correction problem
"F2-37" Drum mark sensor fault

Cause : CRUM chip defect OR Improper developing unit
Check and remedy : As you have already replaced the tonner, we can suggest Replace the CRUM chip,Replace the developing unit

Regards,
Shrey

Sharp AR-M160... | Answered on May 19, 2016


1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key "*" key "C" key "*" key

Main code 14 Start key Sub code 0 Start key

OR

"#" key "INTERRUPT" key "C" key "INTERRUPT"

Main code 14 Start key Sub code 0 Start key

2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.

* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.

Note: If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required.

DO NOT CONTINUE RESET AS THIS CAN CAUSE A FIRE AND RUIN A PERFECTLY GOOD DAY.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sharp AR-M160... | Answered on Jan 29, 2016


It just means that your machine is due for maintenance. It should be usable

Sharp AR-M160... | Answered on Jan 19, 2016


A DOOR IS OPEN SOMEWHERE ON THE DEVICE.

Sharp AR-M160... | Answered on Dec 14, 2015


that what happens when power is not stable but u can cancel h4 in the program of the machine

Sharp AR-M160... | Answered on Dec 02, 2015


Your printer doesn't support Windows 7.But it support Windows Vista.

Here is the driver download page from www.sharpusa.com

http://www.sharpusa.com/CustomerSupport/ProductDownload.aspx

Fill the form as below

Select a Product Category    :  MFPs & Printers
 
Enter Product Model             :  Models not listed
 
Enter Product Model             :  AR-M160 
 
Select a Download Type        :  Driver        
 
Driver Platform                      :  Microsoft          
 
Operating System                 :  windows Vista


And click "search"

Your printer drivers will be listed below.Click on the driver name (Red colour text),your driver will be downloaded now.        

Note : Drivers which are meant for Windows Vista usually Work with Windows 7 too.you can give it a try. 

Sharp AR-M160... | Answered on Dec 01, 2015


may be Thermistor abnormality Heater lamp abnormality Thermostat abnormality Control PWB abnormality

Sharp AR-M160... | Answered on Feb 23, 2015


Polygon motor lock detection

Detail : The polygon motor does not rotate.
The motor lock signal is detected for 6sec after
rotation of the polygon motor. The motor lock
signal is detected for 1sec during rotation of the
polygon motor.

Cause : Polygon motor unit abnormality
Improper connection or disconnection of the
polygon motor and the harness.
MCU PWB abnormality

Check and remedy : Use SIM 61-1 to check the polygon motor
operations.
Check connection of the polygon motor
harness/connector.
Replace the polygon motor..
Replace the MCU PWB.

Sharp AR-M160... | Answered on Oct 17, 2014


Replace the Heat Roller and Enter into Sim mode to clear the Error Code.

Sharp AR-M160... | Answered on Jul 04, 2014


Means tonner supply failure. Replace the tonner

Sharp AR-M160... | Answered on Dec 09, 2013

Not finding what you are looking for?
Sharp AR-M160 Laser Printer Logo

91 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

printer not print triangle red light

  • Office Equipment & Supplies
Loading...