20 Most Recent
Questions & Answers
Unable to program. I'm tec disadvantaged.
Great, although you have a real scanner, this is not what was meant in this category.
With program your scanner, is not meant you need to write any program. It is just setting up the scanner. That can be done every time you need a different setting. Like if you want to scan FM frequencies, you can set how big steps it should take. But you also can chose other modulation forms. You don't need any Xtals, for that you "Program" the frequencies you want to listen to.
Just switch the scanner on, and listen to what you hear. use the manual, to see where you can find certain users, to chose what frequent band you want to listen to. and switch to that band.
on Jan 26, 2014
We are trying to get
More information would be needed.
Please look on back or under battery pack, for model number and Post that information on here.
Then can offer some direct. input
on Oct 16, 2013
BC346XT Trunk Tracker III
Not sure what's going on here, unless you have the squelch set too high, and it's not allowing any sound. I found a site that has the manual and programming information, and perhaps it would be worth going over and double checking steps and settings:
I tried to find the same problem on the net, but couldn't find any reference to it.
Here is the complete reference manual:
Good luck, recheck your settings, and if nothing helps, contact their support center, here is the web page:
Good luck, and hope this helps you, and thanks for using FixYa.
on Aug 30, 2010
How can program a bearcat 210 XL scanner with new
Wow - that's an oldie. Your scanner has 18 channels, and it's easy to program once you know how. Here's a link to the manual for your scanner. You can download and print the document and learn all of features of the BC210XL.
If you need active frequencies for your are visit
If this response helped, please take a moment to rate me. A rating of "Very Helpful" would be greatly appreciated.
on Nov 24, 2009
Not finding what you are looking for?