20 Most Recent Summit ARWDF129 Deluxe 24" wide washer/dryer combo for non-vented use, Questions & Answers

I could not find a manual for your SPW2201SS, but I did find a manual for a SPW2200SS. (Look for clogged hoses, in and out!) Sadly it only lists three 'error codes' on Page 27 and they include: E10 E21 E31 Summit SPWD2201SS Washer download instruction manual pdf

Summit Washing... | Answered on Oct 28, 2018

On the Whirlpool Duet washer, try pressing and holding the End of Cycle signal button (on the far right of the control panel) for 3+ seconds to toggle the Control Lock on/off. See the manual here: https://www.manualslib.com/manual/193849/Whirlpool-Duet-Front-Load-Washer.html?page=10#manual and here: https://www.manualslib.com/manual/193849/Whirlpool-Duet-Front-Load-Washer.html?page=12#manual . The small print about the Control Lock is almost readable (with good eyesight/correction) in the control panel closeup of the GHW9400PL here: https://www.ajmadison.com/cgi-bin/ajmadison/GHW9400PL.html .

I hope this helps.

Cindy Wells
(When you turn off the washer, it will remember the last setting for the Control Lock. This ensures that the washer can't be accidentally started by a child or while you clean the control panel.)

Washing Machines | Answered Yesterday

cannot spin my washing it always go back to rinse

Washing Machines | Answered Yesterday

Possible bad pressure switch. Some units have this built into the board. Also known as the load selector switch.

Washing Machines | Answered Yesterday

The pump intake is clogged with blanket lint.

Washing Machines | Answered 2 days ago

Why is my washing machine not washing properly?
A common reason why your washing machines is not cleaning clothes properly is because the line leading from the detergent tray to the drum has become clogged up with washing up powder. This means that just a small amount of detergent actually reaches the drum - the rest of it becomes stuck behind the blockage.


Washing Machines | Answered 2 days ago

I can't get my filter out

Washing Machines | Answered 2 days ago

You must mean when the AGITATOR is moving back & forth! The drum spins only in one direction. So...
The agitator is driven off a gear train in the transmission. If the noise is occurring during the AGITATOR’s motion, you’d best have that transmission serviced, and soon; before it could lock up and cause more serious damage.
Call around for estimates in your area for prices to replace the transmission if that is necessary. Ask for a parts and labor breakdown and for terms of the service warranty, which usually covers parts for about one year but labor for much less time. And be sure you use a technician qualified to work on your machine. You could even ask for a reference or two.
Don’t be afraid to have this service done, even on an older machine. If done properly it will serve for at least another 10 years. But if the cabinet is rusted and/or you’ve seen frequent repairs with this machine, replacing the machine is a better decision.
By the way, when you make a service call and inquire in a manner that reflects that you know about these things (like “I’m pretty sure the transmission is the problem because the noise occurs only when the agitator is operating”) you will gain more respect from a serviceman with integrity. He will know you’re serious about having this fixed and he might even suspect it’s already been looked at, so he may be more likely to give you his best price.

Washing Machines | Answered 3 days ago

Not finding what you are looking for?
Summit ARWDF129 Deluxe 24" wide washer/dryer combo for non-vented use, Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Summit Washing Machines Experts

ray gallant
ray gallant

Level 3 Expert

63706 Answers

 Russ Hill
Russ Hill

Level 3 Expert

4048 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Are you a Summit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Summit Washing Machines

  • Summit Washing Machines

Most Popular Question

am receiving error 7 summit spwd2201ss

  • Washing Machines