20 Most Recent HP LaserJet 3030 All-In-One Printer Questions & Answers


Try to unplug directly the printer to the power source and boot it again. tnx

HP LaserJet 3030... | Answered on Aug 18, 2018


You will need to download the driver from the Hewlett Packard website. Follow the link for the driver and choose your Windows version from the list and follow the steps.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&lang=en&cc=ca&prodTypeId=18972&prodSeriesId=378056&taskId=135

HP LaserJet 3030... | Answered on Aug 17, 2018


79 errors are often fatal. Your only hope is to get it back to READY, then update the firmware before it reverts back to 79 ERROR. The other option is to replace the formatter, but it would be about the same cost to replace the whole machine.

HP LaserJet 3030... | Answered on Jul 23, 2018


please see you tube

HP LaserJet 3030... | Answered on Sep 09, 2016


HP LaserJet 3030 All-In-One Printer
Doc. feeder jam, after paper removed completely

HP LaserJet 3030... | Answered on Aug 13, 2016


how could you just determine that the alarm related to the scanner unit i mean says who?

HP LaserJet 3030... | Answered on Apr 17, 2016


verify toner intensity for first, try with new cartrige for second and if it don't work verify cartrige contacts

HP LaserJet 3030... | Answered on Mar 14, 2016


what is the error or the problem now

HP LaserJet 3030... | Answered on Mar 09, 2016


Hello Steve !
The only way scanning Legal documents on this HP LJ 3030 willbe using the ADF ( Automatic Document Feeder) since the size of the flatbed its only for letter.

So, after placing the document on the automatic document feeder theres a few setting you will need to change on the printer.

Number 1 : Go to Main Menu on the printer and look for System Setup, under system set up look for Paper setup,hit ok and now look for "Def. Paper Size" and set it to "Legal"

Number 2 : you should have a button on the printer control panel (Physical printer) that says " Reduce / Enlarge" , hit it and make sure the one selected is "original=100%"

Now just hit "Start Copy" and it print LEGAL ! it worked for me

Hope this help !

You can contact me at:

eliteprintersolutions@gmail.com
Bryan

HP LaserJet 3030... | Answered on Aug 19, 2015


yes and explain. what equipment, type, problem, errocode,

most com ports are using
com 1 (normally the mouse on older pc)
com 2 in the past communication port
com 3 usually to convert to other kinds of ports

you can rearrange these ports in the hardware settings list off you're pc, windows take some time to accept it. if you change you're port think about the consequences.

HP LaserJet 3030... | Answered on May 04, 2015


MORE INFO REQUIRED

HP LaserJet 3030... | Answered on Apr 28, 2015


Sir/Madam

Solution one: Check the fax connections Use the following steps to check the physical connections, and then use the HP Fax Test Service.

Step one: Check the physical connections

  1. Disconnect the telephone cord from the HP fax product, and then examine the connector on the end of the cord. Make sure that the cord has only two wires. Figure 1: Two-wire telephone cord

fe080726-3749-4408-9bf4-fb54019e59a9.gif
  1. Four-wire telephone cordGraphic: Four-wire telephone cordIf the cord has four wires, replace it with a two-wire phone cord.
    If you must use a cord with four wires, use the converter that shipped with product. The converter allows a cord with four wires to work with a device that requires a cord with two wires.
  2. Connect one end of the telephone cord to the telephone jack, and then connect the other end of the cord to the port labeled 1-Line on the back of the HP fax product.
    Figure 3: Fax only


def10672-5060-4912-ab57-70e1058c1a3d.gif

  1. 1 - Telephone jack2 - Two-wire telephone cord to 1-Line
  2. Connect a single-line telephone to the 2-Ext port on the back of the HP fax product.
    Figure 4: Fax and telephon


  3. 1 - Telephone jack2 - Two-wire telephone cord to 1-Line
  4. Connect a single-line telephone to the 2-Ext port on the back of the HP fax product.
    Figure 4: Fax and telephone

21343049-8db2-404b-a921-e7fa4f985989.gif

1 - Telephone jack 2 - Two-wire telephone cord to 1-Line
3 - Telephone
If other devices need to use the same telephone jack, make sure that they are connected to the 2-Ext port on the back of the HP fax product.
Figure 5: Fax with answering machine and telephone


a97fe5c2-e32c-4ca0-aabd-68855faaf816.gif

  1. 1 - Telephone jack2 - Telephone cord from 2-Ext
    3 - Optional telephone cord to telephone
    4 - Optional telephone
    5 - Answering machine
    6 - Two-wire telephone cord to 1-Line
  2. Pick up the telephone receiver and listen for a dial tone. Make sure that you can dial out using the telephone keypad.
    If there is a dial tone and you can dial out using the telephone, the HP fax product is connected correctly to a working telephone cord and telephone jack. If there is no dial tone, check the configuration again and make sure that it is set up correctly.If You Still Having Hp Printer Problem Then Visit Official HP Printer Website On Below Link URL http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02263145
Or

If You Still need HP Printer Online Help Then Follow Us On:


HP Printer Support

HP LaserJet 3030... | Answered on Mar 30, 2015


I would start here by cleaning the feed rollers but there could be several causes to this. It could be the fuser film is slipping and not getting the paper out in time thus throwing a false paper jam message. It could be the fuser isn't turning at all and not allowing the paper to enter. Normally if the paper is making it out of the tray then it isn't the feed roller but that is always the cheapest place to start. You can clean the roller(s) with an alcohol wipe or rag with alcohol on it.

Does the paper make it past the toner cartridge? I have seen toner cartridges lock up and cause this type of problem as well. If the paper isn't making it past the toner I would try replacing the cartridge (even if its with an old one just to test the paper path).

HP LaserJet 3030... | Answered on Feb 19, 2015

Not finding what you are looking for?
HP LaserJet 3030 All-In-One Printer Logo

357 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

hp laserjet 3030 keeps reading 79 error

  • Office Equipment & Supplies
Loading...