20 Most Recent HP Color LaserJet 4600n Printer Questions & Answers


This should help. Good luck !

Cassette (Tray 2) paper pickup and feed rollers

To remove the paper pickup and feed rollers

1 Remove the cassette.

2 Locate the two rollers on the bottom of the paper pickup unit (above the cassette). The pickup

roller is the smaller roller, and the feed roller is the larger roller.

3 Pinch the tab on the end of the cassette pickup roller (callout 1), and pull the roller out.

4 Pinch the tab on the end of the cassette feed roller (callout 2), and pull the roller out.

Figure 6-24 Removing the cassette pickup and feed rollers

Note Always replace the cassette pickup roller and the cassette feed rollers at the same time. Also replace
the separation roller (located in the paper cassette) when replacing these rollers

HP Color... | Answered on Apr 18, 2018


Feedroller HP Feed Rollers Printer Parts HP Laserjet Feedrollers

You can download a manual from this site. Run the diagnostics which allows you to test individual components one at a time. You could have a bad drum motor or possibly just a noisy cartridge.

HP Color... | Answered on Sep 30, 2015


Lser beam of black error.. remove laser scanner assm.. check motor rotation.. >Jammed or hard rotation..remove motor gently.. lubricated the shaft..fix..Only professionals can perform this activity..

HP Color... | Answered on Jan 31, 2012


First, make sure your Router is configured for DHCP, and the Printer is plugged into the Router using a Network Cable. Also, make sure the Activity light on your Router is On for the Port that your plugged the Printer into.

Configuring TCP/IP parameters
You can use the printer control panel to configure the following TCP/IP parameters:
  • usage of the BOOTP file for configuration parameters (the default is to use the BOOTP file)
  • IP address (4 bytes)
  • subnet mask (4 bytes)
  • default gateway (4 bytes)
  • TCP/IP connection timeout (in seconds)
Note: Do not disable BOOTP if you will be using RARP or DHCP to configure TCP/IP parameters.

To automatically configure TCP/IP parameters from the printer control panel:
1. Press the Check Mark button to enter the MENUS.
2. Press the Down Arrow to highlight CONFIGURE DEVICE.
3. Press the Check Mark button to select CONFIGURE DEVICE.
4. Press the Down Arrow to highlight I/O.
5. Press the Check Mark button to select I/O.
6. Press the Down Arrow to highlight EIO X (where X = 1, 2, or 3).
7. Press the Check Mark button to select EIO X.
8. Press the Down Arrow to highlight AUTO.
9. Press the Check Mark button to select AUTO.
10. Press the PAUSE/RESUME button to return to the READY state.

Here is your Manual, with more information about Network Configuration:
http://business.fsu.edu/tech/printermanuals/laserprinters/HP4600.pdf

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

HP Color... | Answered on Jun 18, 2011


The parallel cable on the HP 4600n is a smaller C style connection not the typical larger B style. If you ar looking for a parallel cable ask for an A-C cable. So far I have not seen a USB adapter for this size. I would suggest using the Ethernet cable if it is a 4600n.

HP Color... | Answered on Jun 10, 2010


simply, restore your setting to factory setting

HP Color... | Answered on Mar 31, 2010


check your user manual to know the blinking code

HP Color... | Answered on Mar 31, 2010


First. Examine the toner cartridges by inspecting the surface of the drum of each color cartridge. Score marks? Replace toner cartridge(s).
Next. for vertical lines from top to bottom, you will want to inspect the fuser real quick to see if the Hot roller is scored or worn or discolored or any adhesives are adhered to roller. Should be perfectly smooth and uniform in color.
Next, do the consumables life page which is in a menu function.
Information --> Supplies Status Page.
This will tell you the life remaining of the image transfer kit (C9724A) as well as fuser unit. These indicators will help you decide if the consumables are the first cause of the print quality issues you are observing.

HP Color... | Answered on Feb 19, 2010


too much data or not enough memory in your printer to support the job.

Also possibly corrupted data in your powerpoint doc.

if you are using PCL version of the driver, download and setup the PS (PostScript) driver from HP.

There are conflicts with printing PDF/Powerpoint docs using PCL driver.

let us know if this helps. Another thing you can try if possible, convert the Powerpoint into a PDF file and then try printing, but select "Print as Image" in the Advanced section of the print options.

HP Color... | Answered on Feb 11, 2010


Need to Clean the Lance located



4a4fd1d.jpeg

HP Color... | Answered on Jan 04, 2010


you will be havin a connecting chord...... connect it to the plug and play port or usb port...........it will ask for installation. install the drivers and use your printer

HP Color... | Answered on Nov 03, 2009


Why not just that the printer is broke?

Please I need a lot more descriptive information before I can help you.

Would you consider sending me the original document and a "Print to File" of the document. I will also need to know where in the printout the error occurs.

I can run it through some of the tools I have and see if I can spot the failure.

Please send the files to; don.farr@verizon.net. I will let you know I have them and get a quick look at them to see if it something simple.

Don

HP Color... | Answered on Oct 22, 2009


you have 2 options:

1. it is either you install the MAC drivers of the printer to your Mac and the Windows drivers to your Dell and make it work both ways by unplugging or replugging the printer from one computer to another,

or

2. you can get a printserver and connect the printer to that device which will be connected to your network where the MAC and the Dell is connected. This way you can print on both machine without unplug and replugging of the printer.

below are some resources you need.

you can use this device to connect your computers in the network plus the printer.

http://www.apple.com/airportextreme/

extreme is a router, printerserver and a network attached storage in one.

hope this helps, if you need more info, please let me know

HP Color... | Answered on Sep 29, 2009


This problem may be an indication of needing the paperpick-up assembly repalced. It is hard to tell without seeing it.

HP Color... | Answered on Jul 07, 2009


To select the default language on the Control Panel:
  1. Press the [Up] or [Down] arrow button on the Control Panel to select [Printer Setup] on the Display Screen, and then press the [OK] button.
  2. Press the [Up] or [Down] arrow button to select [Control Panel Setup], and then press the [OK] button.
More items...

SOLVED: Change language from german to english on p3015 - Fixya


www.fixya.com/support/t12816917-change_language_from_german_english

change the language on HP laserjet 3015 printer Google Search

HP LaserJet... | Answered 6 hours ago


Guys, its easy.. I found a little piece of paper after seeking calmly. It was on the paper pulling system when collecting from the tray. See the pic, it was right whee i'm pointing with my tool. It was locking one of the sensors around there. See in the third image where my tool is pointing.. Its exactly inside and very difficult to see.. And one more thing.. You'll have to unscrew the upper cover to see it.. Good luck
I love smart gadgets like this. Easy to solve. 1d69ed0c-5731-4c6b-ae7c-d49ff90e96d8.jpg 8e1e42b8-3851-411a-98e1-09eb08d019b9.jpg dd6af869-4bf3-4193-af33-57d2d362752b.jpg

HP LaserJet... | Answered on Jun 30, 2019

Not finding what you are looking for?
HP Color LaserJet 4600n Printer Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

hp4600n uses parallel cable but when

  • Office Equipment & Supplies
Loading...