Lexmark X8350 Print, Scan, Copy and Fax All-in-One Multifunction Printer Plus Photo w/USB Printer ... - Answered Questions & Fixed issues


lexmark x204n invalid cartridge

Lexmark X8350... | Answered on Jul 01, 2016 | 62 views


Explain this . Why you feel it "thinks" . I think you should read user's manual
http://www.office.xerox.com/userdoc/P8860MFP/pdfs/user_guide_en.pdf

Lexmark X8350... | Answered on May 23, 2015 | 138 views


"Save AS", select JPG, PNG, GIR etc....

Lexmark X8350... | Answered on May 23, 2015 | 45 views


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.

Lexmark X8350... | Answered on May 23, 2015 | 95 views


Hi,
i solved question.Contact now
Lexmark Printer Support

Lexmark X8350... | Answered on Aug 21, 2014 | 55 views


The Grinding Noise has something to do with the scanner not the Printing Part, I think the scanner could have something stuck on the moving tray....!!!!!!

Lexmark X8350... | Answered on May 13, 2013 | 375 views


The problem could be due to a communication failure between one of the printheads (cartridges) and the All-In One (AIO) or by a short in one if the printheads. Please follow the steps below to identify and fix cartridge issues:

  1. Make sure the printer is on.
  2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-In-One is busy. Note: If the carrier does not automatically move to the center, turn off the printer or unplug the printer from the power source and then carefully slide the carrier to the center.
  3. Remove both cartridges from the carrier.
  4. Close the printer cover.
  5. Re-brick your printer by pulling out the power supply - black box behind the printer where the power cord is plugged in to, and re-plug after 30 seconds.
  6. When the printer turns on, reinsert one cartridge first. Close the printer cover and check for any errors.
  7. If no error appears, reinsert the other cartridge. Close the printer cover.
  8. Replace whichever cartridge is causing the error to appear with a new genuine Lexmark cartridge. Try to print a document again to verify that the problem is fixed.

Lexmark X8350... | Answered on Apr 09, 2012 | 37 views


The USB cable would be the standard A/B cable. the port on the back of the printer, is located under the phone line jack. Open the attached URL for the setup guide.

http://www.lexmark.com/publications/pdfs/8300/eng/setupsh.pdf

Lexmark X8350... | Answered on Mar 16, 2012 | 47 views


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer (if USB connected)> reboot your pc > unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer (if USB connected). Then try to print again once the computer fully recognizes the USB connection or when the WiFi light on the printer turns solid green (if WiFi connected.).


If that doesn't help, try the steps below:

  1. Disconnect the USB cable connecting the printer from your computer.
  2. On your computer, go to Control Panel > Printers and Faxes.
  3. Delete the Lexmark print object.
  4. Reboot computer.
  5. Re-brick your printer by pulling out the power supply - black box where the power cord is plugged into on the back of the printer, and re-plug after 30 seconds.
  6. When the printer turns on, reconnect it to the computer.
  7. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, try to print a document to verify that the problem is fixed.

Lexmark X8350... | Answered on Jan 28, 2012 | 48 views


Hi Alan I think it is the cartridge that is causing your issue but I cant promise that it is.I can tell you from many years experience it very rarely is an issue with the printer breaking it is 99% of the time inferior consumables causing printers to fail, and sometimes wrecking printers so even when the customer does use good consumables it is too late and the damage is done, but we can't be sure of anything unless we start with basics and get 100% brand new Original Equipment Manufacturers carts (OEM) and stick them in. (no I don't work for Lexmark;)

Lexmark X8350... | Answered on Dec 05, 2011 | 133 views


Here a link to your Manual

And links to the instructions for your error that I guess you have already read too

answer in comments having trouble posting

Lexmark X8350... | Answered on Nov 06, 2011 | 108 views


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.



You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/eO4Y77. Select your operating system, download and execute the file.

Lexmark X8350... | Answered on Oct 03, 2011 | 53 views


Please visit the Lexmark website to download and install the Lexmark X8350 Driver on your computer. Select your operating system, download and execute the file. Follow the instructions on your computer screen.
The Lexmark X8350 printer does not come with a USB cable (to connect the device to your computer). You'll have to provide your own cable. You may contact Lexmark Technical Support Center for assistance.

Lexmark X8350... | Answered on Sep 12, 2011 | 90 views


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print again.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/eO4Y77. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X8350... | Answered on Sep 02, 2011 | 108 views


Open the printer cover and remove both cartridges. Check the cartridge area for any obstructions or foreign objects blocking the cartridge carrier path. Also, try to check for the encoder strip (transparent strip behind the cartridge carrier) and make sure it is not unseated from its position. The encoder strip helps with the mechanism of the cartridge carrier in the assembly.
When cartridge is clear and looks normal, close the printer cover. Unplug/re-plug the printer into the power source to reset it. When the printer turns on, firmly re-insert the cartridges. If no error appears on the printer screen, try to print again.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X8350... | Answered on Sep 02, 2011 | 56 views

Not finding what you are looking for?
Lexmark X8350 Print, Scan, Copy and Fax All-in-One Multifunction Printer Plus Photo w/USB Printer ... Logo

142 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...