20 Most Recent Canon PIXMA iP5200R InkJet Photo Printer Questions & Answers


Power supply issue.

Canon PIXMA... | Answered on Jun 13, 2018


I had the same problem. I got tired of it and went to the Goodwill and bought me another one for $5.00. Just exact same make and model.
Try that.
Abdu.

Canon PIXMA... | Answered on Aug 25, 2011


hello leif mo, these are the instructions from the CANON support page Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

Hope this answers all your questions Please remember to Rate/vote for any solution that helps you out. Leave a comment if you need more help. Thanks for using Fixya

Canon PIXMA... | Answered on Aug 09, 2011


Try downloading the printer driver from the Canon WEB site.
You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and
select your model printer todownload :- http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Canon PIXMA... | Answered on May 01, 2011


on this page
http://software.canon-europe.com/products/0010234.asp
select a operating system and a language
download your driver and success

Canon PIXMA... | Answered on Feb 20, 2011


The Canon Program "CD-Label Print" has issues with Windows 7.

I solved it this way:

  1. Find the "CDLabelPrint.exe" most likely under "C:\Program Files\CD-LabelPrint"
  2. Right-Click on the File and choose Properties
  3. Select "Compatibility" and tick "Run Program ... Windows XP (SP3)"
  4. Push "OK"
  5. You should be fine now
See Picture for Details.

schlurch_2.png

Canon PIXMA... | Answered on Dec 23, 2010


I don't understand when you say, "chip" with this printer's cartridges, there should be gold contacts instead of chip, and there's another unit called Printhead.
Try the following tips: 1. Start with printer Off 2. Hold down "Resume" and then hold down "Power" 3. Release "Resume" 4. press "Resume" twice, then release "Power" 5. let green light blink until printhead has finished moving. 6. Select functions below with "Resume", execute with "Power"
I'll post another tip, since here's word limit, I can't post the whole at one go.

Canon PIXMA... | Answered on Sep 28, 2010


If you still can print, it signal's low ink. If it flashes at once, as you turn on the printer and nothing's happen with the printer or no movement or unusable due to error flashing, there is an error either with your ink cartridges (need raplacement) and or hardware mechanical errors. Hope this helps.

Canon PIXMA... | Answered on May 13, 2010


you have to change the driver settings to print whole documents.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Canon PIXMA... | Answered on Sep 30, 2009


There may not be a solution for this as yet because Windows 7 has not been released to the public yet.

The latest release was the RTM which was issued to manufacturers to bring their drivers up to date with it.

Canon PIXMA... | Answered on Aug 08, 2009


You need a new ink absorber kit with a guard sheet to stop ink from coming up from the bottom and getting on the exit rollers. It's a major job to remove the print engine and a messy one. Best done in repair shop..

Canon PIXMA... | Answered on Jun 26, 2009


Try and disconnect your printer from the power for 1 min. Plug it back in and try again please repost if further help is needed

Canon PIXMA... | Answered on Dec 28, 2008


http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11994

Click select OS and then select your version of windows then install what pops up under drivers. This is your backup if the cd doesn't work

Canon PIXMA... | Answered on Dec 28, 2008


There are 2 types of black cartridge, CLI-8Bk Black Ink Tank & PGI-5 Pigment Black Ink Tank. These must be installed in the correct order as below. Have you replaced a black cartridge & perhaps used a different type? Here is a link you can get more info from: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=11994

Canon PIXMA... | Answered on May 27, 2008


After long research .... I found out that the pixma is indeed a network printer ;) .... BUT it has a printserver already build in!!!! Having 2 Servers is obviously not too good of an idea ;) ....still wonders me as to why it did work in the 1st place ..... (i guess there was something wrong with the w2k3 print server *muhaahha)

Canon PIXMA... | Answered on May 08, 2008


The problem lies with in the waste ink. The way canon have designed the way for the waste ink to get absorbed in a songe, that lies next to the rollers that help the paper out of the printer.
They lie underneith the metal cover if you open the printer lid you will see it.
What happens the waste ink gets to a place where it builds up and up and up, then comes into the area where the rollers lie and so when the paper is fed out you have a black line down the back of your page.
The only way to stop it is by opening up the printer if you know how to, if you dont, dont try it. Then cleaning the roller and blocking the area where the ink is coming in.
Once all that is done you shouldnt have any problems.

Canon PIXMA... | Answered on Feb 11, 2008


If you have had your printer for some time, or you havent used it for along time.
What happens the heads get clogged inside. So you can do as many deep cleanings as you what and it wont help.
You have to get the heads cleaned by a printer techcian that nows how to clean them.
Be carefull thou, because if you damage the heads to replace it will cost you about the same as the printer.

Canon PIXMA... | Answered on Feb 01, 2008


I had the same problem, canon said nothing wrong with printer, solution I found was to slightly lift the rear of the tray as it fed in, as it appeared to hit something on way in when fed by itself

Canon PIXMA... | Answered on Jan 30, 2008

Not finding what you are looking for?
Canon PIXMA iP5200R InkJet Photo Printer Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2256 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA Canon

  • PIXMA Canon

Most Popular Question

canon ip5200r turn yelow

  • Office Equipment & Supplies
Loading...