Top 20 Canon imageRUNNER 2016 All-In-One Laser Printer Questions & Answers


E010-0000 Main motor failure
The main motor is faulty. - Check the connector of the main motor.
- Replace the main motor.
- Replace the DC controller PCB. http://mfpdoc.com/?mod=free&chap=erc&brand=Canon&model=iR2016

Canon... | 205 views | 0 helpful votes


just clear All. you can try.
press button Additional function - 2 - 8 - additional function - (#SSW on display) press button arrow to search Clear - Ok - press button arrow to search All - press ok. wait until ready (about 5 minute)

Canon... | 446 views | 0 helpful votes


Nothing displays on screen on IR 2016 . Dear. you may check the flat cable connected with the display unit which becomes faulty . change the flat cable then it will show everything on screen.

Canon... | 77 views | 0 helpful votes


Dear, check all the ccd flat cables of scanner unit and dc boards back side and replace them which are faulty due to long time which lost the metallic strength for which this issue comes .One flat cable is fitted from scanner lamp unit to its board which is long cable and two flat cables are fitted with this scanner board to back side pcb which are long and another one is connected to two pcb boards at back side one comes from mother board to other board,

Canon... | 268 views | 0 helpful votes


Dear User,
press additional setting in canon ir 2016 photocopier.then choose language setting tab now select the language by pressing + or - button then save it. it may work.

Canon... | 150 views | 0 helpful votes


REPLACE THE FIXING FILM

Canon... | 61 views | 0 helpful votes


Dear. first change the drum cleaning blade and clean the waste toner from the drum unit safely and then try to copy if the black lines still appears then change the drum then it must solve the issue , If still the problem comes then check the laser unit if there is anything which produce the black lines on the pages.

Canon... | 333 views | 1 helpful votes


E019 usually means the waste toner is full. The waste toner is, I believe, in the drum, so you'll need a new drum. The drum appears to be under the front cover. You might want to call your service rep. if you are not comfortable doing this yourself.

Canon... | 242 views | 2 helpful votes


Ir 2016, can be onlly pull scanner, so that means that you must have installed scan gear, selected in scan gear, and over microsoft word or similar insert scan ( INSERT PICTURE FROM SCANNER OR CAMERA ), but the machine must be in scan mode, put original on platen or dadf, and then "pull it"from PC.

Hope that helped


pls.rate

Canon... | 1,586 views | 0 helpful votes


to solve this problem, loading the system software to do this, you need the tool called Canon SUPORT SERVICE TOOL

Canon... | 49 views | 0 helpful votes


hey, wel if the copier is showing a message saying that the waste toner is full it means the waste toner deposit is attached to the drum unit.

so, open up the frotn cover, pull down the (drum)-lock lever, it should release the left cover, then pull towards you the drum unit, and there you go.
the black case with a small trasparent cap is the waste toner deposit.

you have two ways to go.

1 you may remove that rounded transparent plastic cap and be able to vaccum the waste toner (dont even try reusing that toner, it wont work ok) or

2 you can go the other way wich allows you to easily vaccum it: remove the drum (the roller itself) then the charger roller, then the cleaning blade and there yo go again, but now you got more space to vaccum and believe me it is easier this way.

an additional choice would be to buy a new drum unit gpr18 i think (check please) and forget all about vaccum-ing.

Canon... | 901 views | 2 helpful votes


wich parts do you need? you can write on emma.servis@gmail.com

Canon... | 129 views | 0 helpful votes


You should be able to access the manual if you follow this link. https://camerausermanual.net/canon-powershot-a570-is-manual/

Canon Office... | 186 views | 1 helpful votes


The direct number for Canon Parts is 732-521-7230. I'm not certain that they support it any longer.

Canon Office... | 592 views | 1 helpful votes


  • Select cableless protection from the screen of setup protection selection.
  • Now to connect cannon ip8720 printer to wi-fi, on the setup screen , hold the button wi-fi on your printer and keep on pressing until the power light flashes, two times in a row.
  • now, on the connection through the cableless setup screen , select screen.
  • The software installation list will open up in front of you . choose the software that you want to install, then click on next.
  • Follow instruction on the screen, click on Ok when the setup completion dialog box opens up on the screen.
  • Now follow instruction on the screen, select add printer, when then add printer screen opens up on the screen.
  • Now, choose cannon ip8700 series with cannon IJ network . Now, click on Add.
  • Add printer screen will open up, Click on next.
Now, the process to connect cannon ip8720 printer to wifi is complete.

Canon Office... | 45 views | 0 helpful votes


alex walker is a known spammer here

Canon Office... | 98 views | 0 helpful votes

Not finding what you are looking for?
Canon imageRUNNER 2016 All-In-One Laser Printer Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2253 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

canon 2016 vertical black lines print

  • Office Equipment & Supplies
Loading...