Canon imageRUNNER 2016 All-In-One Laser Printer - Answered Questions & Fixed issues


just clear All. you can try.
press button Additional function - 2 - 8 - additional function - (#SSW on display) press button arrow to search Clear - Ok - press button arrow to search All - press ok. wait until ready (about 5 minute)

Canon... | Answered on May 25, 2018 | 452 views


Dear. first change the drum cleaning blade and clean the waste toner from the drum unit safely and then try to copy if the black lines still appears then change the drum then it must solve the issue , If still the problem comes then check the laser unit if there is anything which produce the black lines on the pages.

Canon... | Answered on Nov 09, 2017 | 333 views


Nothing displays on screen on IR 2016 . Dear. you may check the flat cable connected with the display unit which becomes faulty . change the flat cable then it will show everything on screen.

Canon... | Answered on May 28, 2018 | 77 views


Dear, check all the ccd flat cables of scanner unit and dc boards back side and replace them which are faulty due to long time which lost the metallic strength for which this issue comes .One flat cable is fitted from scanner lamp unit to its board which is long cable and two flat cables are fitted with this scanner board to back side pcb which are long and another one is connected to two pcb boards at back side one comes from mother board to other board,

Canon... | Answered on Nov 09, 2017 | 269 views


E010-0000 Main motor failure
The main motor is faulty. - Check the connector of the main motor.
- Replace the main motor.
- Replace the DC controller PCB. http://mfpdoc.com/?mod=free&chap=erc&brand=Canon&model=iR2016

Canon... | Answered on Nov 07, 2017 | 207 views


Dear User,
press additional setting in canon ir 2016 photocopier.then choose language setting tab now select the language by pressing + or - button then save it. it may work.

Canon... | Answered on Oct 17, 2016 | 150 views


REPLACE THE FIXING FILM

Canon... | Answered on Jul 19, 2015 | 61 views


E019 usually means the waste toner is full. The waste toner is, I believe, in the drum, so you'll need a new drum. The drum appears to be under the front cover. You might want to call your service rep. if you are not comfortable doing this yourself.

Canon... | Answered on Mar 20, 2011 | 242 views


Ir 2016, can be onlly pull scanner, so that means that you must have installed scan gear, selected in scan gear, and over microsoft word or similar insert scan ( INSERT PICTURE FROM SCANNER OR CAMERA ), but the machine must be in scan mode, put original on platen or dadf, and then "pull it"from PC.

Hope that helped


pls.rate

Canon... | Answered on May 14, 2010 | 1,586 views


wich parts do you need? you can write on emma.servis@gmail.com

Canon... | Answered on Mar 01, 2010 | 129 views


to solve this problem, loading the system software to do this, you need the tool called Canon SUPORT SERVICE TOOL

Canon... | Answered on Nov 25, 2009 | 49 views


hey, wel if the copier is showing a message saying that the waste toner is full it means the waste toner deposit is attached to the drum unit.

so, open up the frotn cover, pull down the (drum)-lock lever, it should release the left cover, then pull towards you the drum unit, and there you go.
the black case with a small trasparent cap is the waste toner deposit.

you have two ways to go.

1 you may remove that rounded transparent plastic cap and be able to vaccum the waste toner (dont even try reusing that toner, it wont work ok) or

2 you can go the other way wich allows you to easily vaccum it: remove the drum (the roller itself) then the charger roller, then the cleaning blade and there yo go again, but now you got more space to vaccum and believe me it is easier this way.

an additional choice would be to buy a new drum unit gpr18 i think (check please) and forget all about vaccum-ing.

Canon... | Answered on Jan 26, 2009 | 901 views


Use ethernet cable.

http://gdlp01.c-wss.com/gds/6/0300008156/03/MF4800_4700Series_STARTER_en-us_R_2.pdf

Canon Office... | Answered Yesterday | 16 views


You can't. On Canon machines they make you have a full set of good cartridges.

Canon Office... | Answered Yesterday | 197 views


You can print out the network setting for the MP495, including the IP address, if the printer is not giving any errors. With the printer in standby, press the Maintenance button (with a stylized wrench and screwdriver, just above the Black button) repeatedly until an upside-down U appears. Then press the Black or Color button, as if printing a copy on the all-in-one. The IP address will be in the third column of the12th row below the heading. The first column in the row holds "IP Address". See https://support.usa.canon.com/kb/index?page=content&id=ART110996&actp=search&viewlocale=en_US&searchid=1568565298004&fac=CMS-CATEGORY-CANON-PRODUCTS.PRINTERS.INKJET_MULTIFUNCTION.MP_SERIES.4499B026 for images of the buttons.

I hope this helps. You may also be able to get the IP address from your router's list of devices (after logging in) or your OS's Printer information page. (In Windows, open Control Panel > Hardware and Sound > Printers and Devices > Right click on the MP495 icon and look at Properties and Printer Properties.

Cindy Wells

Canon Office... | Answered 2 days ago | 22 views


If your asking how can you default so all printing is done in mono, unless you want it to be colour, there will be a setting in the printer driver that does this

Canon Office... | Answered 3 days ago | 21 views


Go to the canon website, if the software is there it will give instructions.

Canon Office... | Answered on Sep 13, 2019 | 855 views

Not finding what you are looking for?
Canon imageRUNNER 2016 All-In-One Laser Printer Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2254 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...