20 Most Recent Canon ImageRunner 2020i Copier Questions & Answers


operate copier without AUTO

Canon... | Answered on Sep 03, 2016


Sir I have canon 2870 machine. The machine giving the finisher problems, when starting the finisher going down. The machine showing the problem E540. Please kindly solve

Canon... | Answered on Jun 28, 2016


Hi,
You need to replace fixing film.

Canon... | Answered on Jun 28, 2016


Hello,
its fuser unit temp. rise detection
to reset the error:

Enter the service mode:
press asterix key ( add. functions ) "*"
press 2
press 8
press asterix key ( add. functions ) "*"

With right arrow, go to CLEAR, press OK, with arrow choose Engine and OK.

Turn off and on.

Canon... | Answered on Mar 26, 2014


replace the fuser film

Canon... | Answered on Mar 26, 2014


At a quick glance I found this site. Looks like it will have to come from China.

http://www.tutuprinter.com/list-canon.htm

Canon... | Answered on Nov 22, 2013


A replacement heater element is required as it is not heating correctly.

Canon... | Answered on Oct 28, 2013


see on the back side of the machine .there will be four ports .one USB port ,one LAN port , and two phone jacks in the middle of the cover.in one u have to insert the main line and the other is for extension to the handset.

Canon... | Answered on Aug 17, 2011


check the toner hopper .toner is not being fed into the developer module at set rate.clean the hopper by blowing the toner and check the toner screw motor for rotation and do check when u install toner by service mode does the toner bottle rotate.

Canon... | Answered on Aug 13, 2011


this message is 90% from the second tray.try to close the small door of the 2nd cassette forcefully.if it does not work u can disconnect the second tray by unplugging the wire from the engine board on the back side of the machine by removing the back cover.it will be a yellow p/j in the middle of the board.u can easily trace it as it goes down to the 2nd tray.

Canon... | Answered on Jul 15, 2011


Formate the hard disk or chand the hard disk

Canon... | Answered on Feb 21, 2011


adjust paper sensor

Canon... | Answered on Dec 20, 2010


Check the dial or slider on the side of the cassette tray for size indicator. This will cause jamming and the improper size message. Make sure the indicator matches the size of paper in the tray.

Canon... | Answered on Sep 17, 2010

Not finding what you are looking for?
Office Equipment & Supplies Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2250 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

canon ir2020 copier says resizing

  • Office Equipment & Supplies
Loading...