20 Most Recent Fujitsu Siemens PlasmaVision P42VHA40 Monitor - Page 5 Questions & Answers


You can order and replace the noisy fan.
It is not difficult to do and requires minimum tools.
Just be sure any dust or debris is removed from heat sink fins, power supply and air vents in the case. Check clearance and dimensions before purchasing the new fan. Just like Goldie locks you want it Just right. Not to big and not too small.
If you blowing the Power supply out with compressed air. (always a dust magnet) Be sure to hold the power supply fan with a wooden dowel or anything to prevent blades from spinning. Be sure to do all this with the power off and unplugged. Compressed air can over rev the power supply fan and damage the bearings. (you'll have another noisy fan within a short time if you don't.)
Good luck hope this helps!

Fujitsu Siemens... | Answered on Apr 02, 2014


may be you replaced with a bad one

Fujitsu Siemens... | Answered on Mar 26, 2014


Things to check:

Does your AC adapter output at the correct voltage? If no, get a new one.

Does your DC socket feel loose in anyway once the AC adapter is connected? If yes, you may need to repair/replace it.

If you are sure both of these things are ok, could you advise do you get any life from the laptop at all? Any lights? Even a charging indication light?

Fujitsu Siemens... | Answered on Mar 20, 2014


If the screen is totally dead and nothing happens, it could be the power supply. If it starts but does not boot up you could either have a software or hardware issue.

Fujitsu Siemens... | Answered on Mar 18, 2014


Possibly the cmos battery is low voltage causing issues with the hardware.

Fujitsu Siemens... | Answered on Mar 13, 2014


Did you mean water enter to your laptop? You should detach your laptop's battery and make it dry. You need to disassemble it and let everything dry before you reassemble it and test it.

Fujitsu Siemens... | Answered on Mar 04, 2014


Check the brightness is turned up and if it is, check the inverter.

Fujitsu Siemens... | Answered on Mar 03, 2014


If you didn't find it in Fujitsu's website (probably it is a discontinued model), then you can call this number: 1-800-8FUJITSU

Fujitsu Siemens... | Answered on Mar 03, 2014


If you have access to a desk top computer monitor, plug it into the side port on the laptop. (usually a blue port) and see if you have a video signal. If the Desk Top Monitor functions, and the Laptop is black; your Laptop screen is NG.

Fujitsu Siemens... | Answered on Feb 22, 2014

Not finding what you are looking for?
Fujitsu Siemens PlasmaVision P42VHA40 Monitor Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Cliff itsasecret

Level 2 Expert

47 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PlasmaVision Fujitsu Siemens

  • PlasmaVision Fujitsu Siemens

Most Popular Question

our cable box

  • Computers & Internet
Loading...