20 Most Recent Kyocera FS-1135MFP w/ Document Feeder - Page 6 Questions & Answers


First you have to find out where the paper jam occurs. Check the Rollers and the clutches, then the sensor for the registration and finally the exit sensor. Clean or replace any defective part.

Kyocera Office... | Answered on Jun 16, 2019


10871087, type 004 and press Start. Choose Execute and press again Start. Restart then the device.

Kyocera Office... | Answered on Jun 16, 2019


As I know you cannot enter in Service Mode like the MFPs. Only in the Service Settings in Adjust/Maintenance menu.

Kyocera Office... | Answered on Jun 16, 2019


Try to clean the mirrors in the scanner unit.

Kyocera Office... | Answered on Jun 16, 2019


You can read the manual for the device and the command center in order to setup the Scan to SMB.

Kyocera Office... | Answered on Jun 16, 2019


Go to Adjust/Maintenance>Service Settings>Enable Repair Unit.

Kyocera Office... | Answered on Jun 16, 2019


You need to replace the Fuser Unit. Unfortunately for this machine the reset Fixing is not available.

Kyocera Office... | Answered on Jun 16, 2019


Enter Maintenance Mode 10871087 and press 004 and Start. Then choose Execute and press Start. It will prompt for device restart.

Kyocera Office... | Answered on Jun 16, 2019


You need to run a calibration cycle to bring the laser scanners back into alignment. It may need to be done professionally.

Kyocera Office... | Answered on Jun 14, 2019


The toner is adding to the machine. Let it go for 10-15 minutes. after that it is ok, or the machines says "Replace Toner"

Kyocera Office... | Answered on Jun 13, 2019


you most likely have a bad print job the way you can tell is to turn the machine off unhook network cable turn machine on if it comes ready then you have a job that's causing a problem delete the print queue if you don't know which job it is this should apply to most F... codes

Kyocera Office... | Answered on Jun 13, 2019


Go into service mode and use simulation 130. it will supply toner for about 5 minutes

Kyocera Office... | Answered on Jun 13, 2019


Check the checkbox in the setting for SMTP. You have to switch the SMTP on !!

Kyocera Office... | Answered on Jun 13, 2019


Kyocera 2050 add toner error problem

Kyocera Office... | Answered on Jun 11, 2019


Have a technician update the firmware

Kyocera Office... | Answered on Jun 10, 2019


Press
10871087
251
start
reset ok

Kyocera Office... | Answered on Jun 10, 2019

Not finding what you are looking for?
Kyocera FS-1135MFP w/ Document Feeder Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

error c6400 in 1135

  • Office Equipment & Supplies
Loading...