20 Most Recent Kyocera FS-1135MFP w/ Document Feeder - Page 8 Questions & Answers


Printers are one of the most amazing devices that lesson a load of many by providing printing services. There was a time when printing was not so easy and it was a time taking and difficult process. But now things have changed a lot and printers are more affordable, easy to use and loaded with new innovations and technologies. Kyocera is a name every printer user recognized due to its design, services and finest quality of print at low cost and that too very quickly. Kyocera has been offering printers for many years and has so many satisfied clients worldwide, but sometimes technical issues hinder its working. A user can contact technical support services for Kyocera at Kyocera printer customer service, which is a toll-free number.
There are various issues that Kyocera user may come across but one that usually bugs users most is PCL XL Error. PCL XL Error is not so hard to remove but usually, most printer users have no idea about the techniques and how to tackle glitches. As a service provider for Kyocera, it is our duty to help you out when showing PCL XL Error instead of the things you wanted to print on the page.
Here are the steps you can follow to tackle the PCL XL Error and remove it.
• First of all, go to settings in your system
• Open the control panel in the settings and then go to the devices and printers
• Click on drivers and printers and then go to the printer icon after the next window open
• Right click on the printer icon and select the printer preference
• After selecting printer preference, move to advance settings and then set the Print Data Optimization to Optimize for text and vector and click on apply button.
• The problem is solved now and if you still face troubles and switch off the device and start again.
On the off chance if you are still getting troubles in printing then call kyocera printer customer service number 1-888-597 3962 (Toll Free).
Resource link: https://www.customersupportcare.com/kyocera-printer-support.html

Kyocera Office... | Answered on Mar 28, 2019


Check dev unit cable. And confirm that all doors are closed properly.

Kyocera Office... | Answered on Mar 28, 2019


Scanner lock enabled(Transportation lock) or dirty home position sensor.

Kyocera Office... | Answered on Mar 28, 2019


This means that one of your drums has exceeded its life cycle (carries toner from the cartridge) and generally run around $100 +/- to replace.

Kyocera Office... | Answered on Mar 27, 2019


empty or replace drum unit

Kyocera Office... | Answered on Mar 21, 2019


6482 is default password or try 2000

Kyocera Office... | Answered on Mar 21, 2019


you must use OEM toner if you havent been then you have to empty developer unit and start with OEM toner you need a trained tech

Kyocera Office... | Answered on Mar 21, 2019


if you installed new developer unit you have to initialize it or else there wont be any or enough toner in the developer so its going to always add toner or print light or blank copies

Kyocera Office... | Answered on Mar 21, 2019


you must use OEM TONER if not then you have to empty developer unit and start with OEM toner

Kyocera Office... | Answered on Mar 21, 2019


either have a bad exposure lamp,inverter PCB, or MPCB

Kyocera Office... | Answered on Mar 21, 2019


turn off department management

Kyocera Office... | Answered on Mar 21, 2019


turn off machine, unplug network cable turn it back on with cable unplugged,if it clears error then you have a corrupt print job or dont have paper loaded job needs to print, clear your print queue or load correct size and type of paper print job is asking for

Kyocera Office... | Answered on Mar 21, 2019


probably leaking developer units common problem with this machine or you arent using OEM toner replace all 4 developer units and only use OEM toner

Kyocera Office... | Answered on Mar 21, 2019


they dont last but you should get at least 50K from a pair

Kyocera Office... | Answered on Mar 21, 2019


try unplugging network cable turn off unplug from wall replug see if it comes ready without network cable plugged in if it does delete print queue after you rehook network cable F errors are always print job related

Kyocera Office... | Answered on Mar 21, 2019


go to kyoceras website and search drivers

Kyocera Office... | Answered on Mar 20, 2019


you must use OEM toner if you use aftermarket toner that says for use in you will get this problem if you have been using aftermarket toner you will have to change developer or empty all toner from developer unit and start with OEM toner Kyocera stamps their logo into cartridge

Kyocera Office... | Answered on Mar 20, 2019

Not finding what you are looking for?
Kyocera FS-1135MFP w/ Document Feeder Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

error c6400 in 1135

  • Office Equipment & Supplies
Loading...