Top 20 Kyocera FS-1135MFP w/ Document Feeder Questions & Answers


The Error is described in the Service Manual as - "Zero cross signal error The zero cross signal does not reach the control PWB for specified time."

This can be a damaged wire harness between the High Voltage PCB and another board or a defective Power Source PCB. Bad power at the outlet can also cause this.

Move the machine to another location and make sure nothing else is plugged into the same line. If the problem goes away have an electrician check your wiring.

If the problem still occurs have a Service Technician check the machine and replace the bad part.

Kyocera... | 239 views | 0 helpful votes


Log into the printers web page (ip address) select reset from the advanced page

Kyocera Office... | 34 views | 0 helpful votes


Check the battery on Main PWB.
Also maybe this occurs due to defective Main PWB.

Kyocera Office... | 24 views | 0 helpful votes


There is not a secret service mode.

Kyocera Office... | 46 views | 0 helpful votes


-WARNING! SCAM= DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website

Kyocera Office... | 16 views | 0 helpful votes


There is a jammed piece of paper some where in the feeder probably holding a switch actuator down

Kyocera Office... | 23 views | 0 helpful votes


WARNING! SCAM - DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website

Kyocera Office... | 14 views | 0 helpful votes


Check the cassette's gears on the rear left and the motor inside the machine which drives the cassette's gears.

Kyocera Office... | 27 views | 0 helpful votes


....****WARNING THIS POST IS SPAM**** NEVER CALL ANY NUMBER POSTED ON FIXYA...NEVER. YOUR CREDIT INFORMATION AND COMPUTER ARE IN DANGER HERE......19

Kyocera Office... | 14 views | 0 helpful votes


Check the developer clutch. Maybe it is rusty.

Kyocera Office... | 18 views | 0 helpful votes


If you haven`t the CD, you should check the website & download the driver

Kyocera Office... | 30 views | 0 helpful votes


44 YES FEEL FREE TO CALL THIS NUMBER AS IT IS A DIRECT LINE RIGHT TO GOOD OLD INDIA LOL

Kyocera Office... | 13 views | 0 helpful votes


If you have replace with a new genuine one and the message still remains, try to upgrade to the latest firmware.

Kyocera Office... | 38 views | 0 helpful votes


Enable Job Accounting. It is written in the Operation Guide.

Kyocera Office... | 18 views | 0 helpful votes


Printers are one of the most amazing devices that lesson a load of many by providing printing services. There was a time when printing was not so easy and it was a time taking and difficult process. But now things have changed a lot and printers are more affordable, easy to use and loaded with new innovations and technologies. Kyocera is a name every printer user recognized due to its design, services and finest quality of print at low cost and that too very quickly. Kyocera has been offering printers for many years and has so many satisfied clients worldwide, but sometimes technical issues hinder its working. A user can contact technical support services for Kyocera at Kyocera printer customer service, which is a toll-free number.
There are various issues that Kyocera user may come across but one that usually bugs users most is PCL XL Error. PCL XL Error is not so hard to remove but usually, most printer users have no idea about the techniques and how to tackle glitches. As a service provider for Kyocera, it is our duty to help you out when showing PCL XL Error instead of the things you wanted to print on the page.
Here are the steps you can follow to tackle the PCL XL Error and remove it.
• First of all, go to settings in your system
• Open the control panel in the settings and then go to the devices and printers
• Click on drivers and printers and then go to the printer icon after the next window open
• Right click on the printer icon and select the printer preference
• After selecting printer preference, move to advance settings and then set the Print Data Optimization to Optimize for text and vector and click on apply button.
• The problem is solved now and if you still face troubles and switch off the device and start again.
On the off chance if you are still getting troubles in printing then call kyocera printer customer service number 1-888-597 3962 (Toll Free).
Resource link: https://www.customersupportcare.com/kyocera-printer-support.html

Kyocera Office... | 862 views | 0 helpful votes

Not finding what you are looking for?
Kyocera FS-1135MFP w/ Document Feeder Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

error c6400 in 1135

  • Office Equipment & Supplies
Loading...