20 Most Recent Copystar Kyocera Taskalfa 181 Copier Questions & Answers


Soo...Call for service

Copystar Kyocera... | Answered on Mar 14, 2019


It is fuser error try resetting it by running mode 163, otherwise replace the fuser unit.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Copystar Kyocera... | Answered on Oct 16, 2016


Fuser error. Ensure that no paper is jammed in the fuser unit.Switch the machine off/on.
If fault does not clear call technician.

Copystar Kyocera... | Answered on Jan 20, 2014


change print driver, make sure you use kx driver and not xps driver, also under device settings make sure you change it to pcl xl.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Copystar Kyocera... | Answered on Dec 14, 2013


Fuser error try to reset it otherwise if it didnot work, change fuser unit



I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Copystar Kyocera... | Answered on Dec 14, 2013


please unlock the 2 scanner lock on top left side of the machine. the lock will be in yellow colour and it will covered by red tape.

Copystar Kyocera... | Answered on Dec 04, 2013


This code is a high temperature in the fuser unit. The reset process is as follows, enter 1087-1087-163-print button-execute-print button then shut machine off when the message comes up on the display. The machine should clear the code and reboot, if the code returns you will need to contact a service company for further assistance. Hope this helps.

Copystar Office... | Answered on Sep 11, 2019


if this were your problem it would be obvious the inner tray is in the middle of the machine there is a lever that lifts up as paper stacks up its probably stuck in raised position

Copystar Office... | Answered on Aug 29, 2019


Press 1087, 1087 until the machine shows U000 self status, press 163, press start and then scroll to execute and then press enter. the machine will iunitialize and come ready for copying

Copystar Office... | Answered on Apr 27, 2019


You first need to pull the fuser out and manually check that it is running smoothly. More times than not, it will be the fuser rather than the motor.

If the fuser is fine, locate the motor then turn the machine on and visually inspect. If the motor does not run before the code pops up then replace it.
/uploads/images/copystar-c2300-error-code-34884244-4-1.jpg

Copystar Office... | Answered on Mar 22, 2019


Bad Hard Drive

Copystar Office... | Answered on Mar 14, 2019


Paper jam in the paper cassette

Copystar Office... | Answered on Mar 14, 2019


There is still a jam inside the copier

Copystar Office... | Answered on Mar 14, 2019


Sounds to me like you need a developer change and these machines must have OEM toner

Copystar Office... | Answered on Mar 03, 2019

Not finding what you are looking for?
Copystar Kyocera Taskalfa 181 Copier Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

polytek

Level 3 Expert

453 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Copystar Office Equipment & Supplies

  • Copystar Office Equipment & Supplies

Most Popular Question

plz fix taskalfa 181 c6400 error

  • Office Equipment & Supplies
Loading...