20 Most Recent HP DesignJet 330 InkJet Printer Questions & Answers


unfortunatly the only fix is to replace the firmware chip itself which requires a new main PCA/formatter, I would suggest with the age of this unit that would be most difficult to get hold of and would probably cost more to repair than it would be to procure a 2nd hand more recent unit

HP DesignJet 330... | Answered on Jan 31, 2014


A clog print head noozle sometimes the cause of this problem, so try to clean it and try plug again

HP DesignJet 330... | Answered on Jan 12, 2011


Probably a bad trailing cable. I've seen it many times.

HP DesignJet 330... | Answered on Apr 26, 2010


Guys

1. Thanks for coming up for air
2. We figured out the problem
3. It's a master panel board in the bottom right corner of the printer
4. At this time we will be throwing out this HP 330 and getting another

Thanks for your help.

HP DesignJet 330... | Answered on Oct 04, 2009



This indicates that either the black print cartridge is faulty, misplaced or missing. Try inserting a different black cartridge. Also firmly press the large green plunger fully down once, and then release it. The plunger should return to its original position. Then reset the printer and try printing again. If the problem persists try using a new black cartridge and primeit before use with the power on.

HP DesignJet 330... | Answered on Sep 24, 2009


Sounds like a partial power supply failure; the output for the motor drive(s) has failed. This may be a separate assembly but some covers may need to be removed to determine this. 

HP DesignJet 330... | Answered on Mar 17, 2009


The same Ram can be found in old desktop computers, 486 is about the right time for a 16mb or 32mb RAM chip.

HP DesignJet 330... | Answered on Jan 14, 2009


played with the set up procedure and it fixed itself. thx for the followup

HP DesignJet 330... | Answered on Sep 09, 2008


see the driver are properly installed or if you can do litte bit of serviceing like add oil on the rod . bye

HP DesignJet 330... | Answered on Sep 28, 2007


To solve issues visit https://support.hp.com/in-en/document/c04530811 to get quick support call our Toll-Free 1 888 224 4280

HP DesignJet... | Answered on Jul 30, 2018

Not finding what you are looking for?
HP DesignJet 330 InkJet Printer Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DesignJet HP

  • DesignJet HP

Most Popular Question

film error lights flash replaced ink

  • Office Equipment & Supplies
Loading...