20 Most Recent Panasonic Workio DP-3530 Copier Questions & Answers


It means the fuser section (the Hot Part) has g,one bad to clear the code you will need to get into the tech mode. "Function", "3", Orignal Size "Legal" that order once there go to F9 Look for Fuser Reset then turn off the machine wait 10 seconds turn on if it comes back the fuser needs replacing or worse thre main board!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Panasonic Workio... | Answered on Jul 13, 2018


E3-40 is the copy density sensor on the drum unit. Toner is probably dropping from the drum unit onto it. You have to remove the drum to access the sensor.

Panasonic Workio... | Answered on Jun 17, 2017


Service mode F9/ram initialize/all job clear

Panasonic Workio... | Answered on Aug 11, 2015


Press and hold down energy saver button and function button together then power on the machine. keep on holding the two buttons the machine will once show screen calibration marker then again show the calibration markers now touch the shown marker it will go to a new place keep on touching the final marker will be at center of screen . after touching it the calibration completes

Panasonic Workio... | Answered on Dec 17, 2014


function/original sixe ledger/#3 buttons in the sequence very quickly without releasing the buttons until all 3 are pressed. need 2 hands to do this. then service mode #7/maintenance counters/then web set to 239500.

Panasonic Workio... | Answered on Nov 16, 2014


the best thing that u do first is to clean the fuser unit, esp. the thermostat located there. then you may go to service mode, (function+orig.size+3), F9, look for ram initialize, then look for LBP FUSER RESET.
it will reset all e4 machine error.

Panasonic Workio... | Answered on Aug 30, 2014


did you check and clean primary transfer or change corona wire,optics , drum unit, or check the roller make program adjustment

Panasonic Workio... | Answered on Feb 20, 2013


Check paper exit sensor# 1 or 2 to see if they have become disconnected

GO to service mode, function original size and 3 go f9, then
ram initialize and lbp reset and hopefully that will reset it....

Panasonic Workio... | Answered on Jan 02, 2013

Not finding what you are looking for?
Panasonic Workio DP-3530 Copier Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Shannon Murphy

Level 1 Expert

2 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Office Equipment & Supplies

  • Panasonic Office Equipment & Supplies

Most Popular Question

error code 03 25 something

  • Office Equipment & Supplies
Loading...