Sharp AR-5316 Advanced Digital Imager Copier - Page 9 - Answered Questions & Fixed issues

Unfortunately, Sharp does not list a specific driver for Windows 7. In most cases however, the Vista and Windows 7 drivers are interchangeable. Determine if you need the 32-bit or 64-bit driver and proceed to your product's driver download page below.

AR-5316 Windows Drivers

Sharp AR-5316... | Answered on Oct 21, 2012 | 2,566 views

# interrupt c interrupt

Sharp AR-5316... | Answered on Jul 19, 2013 | 1,017 views

#-star-C-star 25 copy batten-1-copy batten

Sharp AR-5316... | Answered on Oct 20, 2012 | 77 views

Press the :
( #/P ) key --> ( * ) key --> ( clear ) key --> ( * ) key

clear the misfeed: 24 start --> 1 start
reset the maintenance counter: 24 start --> 4 start
reset the developer counter: 24 start --> 5 start
reset the copy counter: 24 start --> 6 start
reset the printer counter: 24 start --> 9 start

Sharp AR-5316... | Answered on Apr 24, 2014 | 1,748 views

Hello sir; H4 code require reset procedure as follow;
1, press"#" "interupt" "c" "interupt" these 4 keys.
2, enter 14 , then press start
3, turn power off and back on .

Sharp AR-5316... | Answered on Oct 04, 2012 | 1,918 views

press # interrupt c interrupt . Display goes off
press 14

Sharp AR-5316... | Answered on Oct 04, 2012 | 734 views

Fuser error code you can reset with sim 14. If it comes back then you have some type of issue with the fuser. Replace it with a new fuser.

If new fuser didn't take care of it, my best guess would be the AC power supply. The triacs for heater lamps are located there. Of course, the harness from AC ps to the fuser connector or the connector itself could have trouble....or, the PCU pwb isn't giving the signal to turn on HL2. Good Luck

Sharp AR-5316... | Answered on Jun 22, 2014 | 256 views

one sensor is dirty you must open and clean it . to more my adress; i can help you

Sharp AR-5316... | Answered on Sep 16, 2012 | 129 views

replace toner cartridge.or if the cartridge has a toner replace ic but be carefull.make sure that there have a plenty of toner on the developer.

Sharp AR-5316... | Answered on Sep 13, 2012 | 61 views

Hi Sorry cant send manual U have to buy like every one else.But here are the codes you require It is service code 24 sub code 04 to reset PM counter and sub code 07 to rest drum sub code 09 to reset print count and sub code 11 to reset developer. Hope this helps

Sharp AR-5316... | Answered on Apr 19, 2014 | 1,206 views

F2 - Black toner supply trouble
Try a different toner cart, remember toshake the cart. before installing. Power the machine on and off andcheck. Check the sealing tape has been fully removed from thecartridge as well as the green colored plug.
Also, if you have an original drum unitframe, change the frame with the new Modified version to preventarching at the rear cover of the drum unit against the inside backplate of the machine.
Check that the black dev. tank is not lowor empty, re-position both drum & dev. tank.

Sharp AR-5316... | Answered on Sep 08, 2012 | 45 views

F5 errorContent Copy lamp error
Detail Copy lamp voltage detection error
Cause Power unit trouble, Copy lamp trouble
Inverter trouble, MCU PWB trouble
Check and remedy
Replace the power unit.Check the copy lamp ON with SIM
Replace the copy lamp.
Replace the inverter.
Replace the MCU PWB.

Sharp AR-5316... | Answered on Aug 31, 2012 | 1,518 views

Cartridge(s) may be putting out too much toner or scratched

Sharp AR-5316... | Answered on Aug 27, 2012 | 134 views

My Sharp Ar 5316 is showing F2 or 2F Error what...

Sharp AR-5316... | Answered on Oct 26, 2015 | 2,597 views

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

1,371 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers


Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides