20 Most Recent GE WSM2480DWW Unitized Spacemaker Washer and Gas Dryer Questions & Answers


pull the hot water hose off at the faucet and machine and check for blockage in the hot water hose,clean or replace the hose sediment screens,then hook back up to water faucet and flush hose with hot water,then check water valve on machine for a screen and clean it as well before reconnecting hot water hose

GE WSM2480DWW... | Answered on Apr 28, 2013


What is the model number of your unit?

GE WSM2480DWW... | Answered on Nov 20, 2012


If it is not draining this could be due to two a few reasons. First is probably a fuse that runs the pump. Second could be a switch that makes the drum spin. I would try the fuse first. It should be in the wiring diagram inside the cover of the washing machine. I usually have to buy these fuses at automotive stores. You must take the cover that surrounds the drum of the washer and follow the wiring diagram but the fuse should be on the lower left I believe.

GE WSM2480DWW... | Answered on Nov 17, 2012


You might need to replace the heater coil or coils....I had to do that on a previous dryer.

GE WSM2480DWW... | Answered on Sep 21, 2012


Possible that the speed is of the spin is not enough, check the belt , check for friction to the shaft in the washer.
finally check the drain valve /pump as if there is water logged on without flushing then the valve is clogged or dirty.

GE WSM2480DWW... | Answered on Aug 24, 2012


clean out the vent that the alumenum hose gos to

GE WSM2480DWW... | Answered on Sep 18, 2011


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

GE WSM2480DWW... | Answered on Aug 25, 2011


When the felt on the front tub guides wears off it will squeak. It can be replaced by part 1220 and 1221 on this diagram and parts list. Take off the front panel along with the door to access it.

There is a ball and socket bearing at the back of the drum but it doesn't usually go bad. If you need to get to it, go in from the rear of the dryer behind the heat coils. 1212 is the bearing housing.

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5221980&diagram_id=22300825#d22300825

GE WSM2480DWW... | Answered on Aug 20, 2010


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

GE WSM2480DWW... | Answered on May 31, 2010


If this is a brand new unit, make sure that the drain hose is hooked up at a level at or above the level of the tub. If it is too low, it can siphon the tub of water.

GE WSM2480DWW... | Answered on Apr 30, 2010

Not finding what you are looking for?
GE WSM2480DWW Unitized Spacemaker Washer and Gas Dryer Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Washing Machines

  • GE Washing Machines

Most Popular Question

remove front panel ge spacemaker

  • Washing Machines
Loading...