20 Most Recent Cobra 150 GTL DX Base CB Radio Questions & Answers


first off if you don't have the proper equipment to do this you will have a cobra 150gtl dx used in the box that you can use for a chock block. turn the wrong can and you will never be able to get it back to working order.

Cobra 150 GTL DX... | Answered on Sep 27, 2018


Look into the Workman Saturn B100 antenna. It's what I would use.

Cobra 150 GTL DX... | Answered on Feb 21, 2018


you can write to parts department requesting price if you have a truck stop around you which has a cb shop they can sell u one

Cobra 150 GTL DX... | Answered on Feb 21, 2018


First thing I would do is check the SWR on the antenna. These newer radios have a strapping diode that shuts them down when the reflected power heats the finals up to keep from blowing them. Once they cool off they will work again.

Cobra 150 GTL DX... | Answered on Oct 02, 2017


CB radios and hand-held CB radios can operate on the same channel and be in contact with each other. Other hand-held radios do not operate on the same frequencies and even though they may have channel numbers the channels have different frequencies and will not operate to CB radios.

Cobra 150 GTL DX... | Answered on Mar 02, 2017


none, they are illegel. But if it were me I would run at least a 450.

Cobra 150 GTL DX... | Answered on Oct 13, 2015


None ,they are illegal . you could put just about anything you want to pay for. Just remember ,the man might get you and you loose all your equip. and get a hefty fine.

Cobra 150 GTL DX... | Answered on Oct 06, 2015


the problem could still be with your swr . If your jeep is fiberglass at the point where your antenna connects that could be the problem. move it to a point where there is metal to get a good ground plane and you should hear people talking.

Cobra 150 GTL DX... | Answered on Feb 16, 2015


what is it you want to know?

Cobra 150 GTL DX... | Answered on Feb 15, 2015


there is a modulation transformer inside it is the smaller of the two. there is a variable resister next to it . that is the variable you need to adjust to get the modulation to 95%.

Cobra 150 GTL DX... | Answered on Feb 15, 2015


may be the mic's element/audio chip

Cobra 150 GTL DX... | Answered on Feb 02, 2015


Sounds like it is not connected properly.

Cobra 150 GTL DX... | Answered on Jan 12, 2015


can you read a block diagram? www.cbtricks has the block diagram,schematics and service manual. Then you can create your own splashbox.

Cobra 150 GTL DX... | Answered on Nov 28, 2014


the locations are markedbut any one with any knowledge would think ,red wire,if I follow it to its origin it will show on the board where its connected. Same with the other wires.

Cobra 150 GTL DX... | Answered on Nov 02, 2014


forgetting to turn it on. making sure its in CB not PA mode.turn squelch all the way to left and rf gain to the right

Cobra 150 GTL DX... | Answered on Aug 23, 2014


Cobra 150 &200 were amateur radios. and are no longer made.
so thats totally different than a 29.

Cobra 150 GTL DX... | Answered on Aug 04, 2014

Not finding what you are looking for?
Cobra 150 GTL DX Base CB Radio Logo

Popular Tags

75 questions posted

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

18072 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Chris

Level 2 Expert

197 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cobra Radio Communications

  • Cobra Radio Communications

Most Popular Question

cobra 150 gtl dx peak tune

  • Radio Communications
Loading...