20 Most Recent D-Link 802.11g Wireless Router WBR-1310 (WBR1310) - Page 4 Questions & Answers


ON THE BACK OF THE ROUTER IS A SMALL HOLE AND WITH THE R ON PRESS IT FOR 10 SECS.AFTER THAT GO TO THE S-UP PAGE.

D-Link 802.11g... | Answered on Nov 07, 2011


Please follow these steps:

- clicl Start, go to Control Panel
- go to Uninstall a Progtam
- look for an application/software called 'Lenovo ReadyComm' or 'Lenovo ReadyComm 5'
- uninstall it and restart your computer

It should connect to your wireless network after restarting your computer and won't kick other devices connected on the same network. Hope this helps.

D-Link 802.11g... | Answered on Oct 14, 2011


Reset the router to factory settings and test. Please remember that security settings may be restored too here, so you may need to encrypt the signal. You will need to log into the router's configuration page in order to achieve these. Also try changing the channel in terms of broadcasting... and test again. I hope I have helped here. Good luck.

D-Link 802.11g... | Answered on Sep 30, 2011


It is asking for your security key. If you do not have it, you will need to reset the router:

How to reset D-Link router to the Factory Default Settings

In general, to reset the D-Link to the Factory Default Settings, please follow these steps:

1. Turn off the router

2. Locate the Reset button on the back of the router.

3. Use a paper clip to press the Reset button and power on.

4. Hold for about 5 seconds (don't hold too long) and then release. (Or, release when M1 and M2 flash at the same time.)



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

D-Link 802.11g... | Answered on Sep 13, 2011


In your router configuration, activate WPA2 encryption with a 64 bit key. Get a random key here:
http://www.grc.com/passwords.htm

Use this key to use the router connection with other computers in your home.

D-Link 802.11g... | Answered on Sep 12, 2011


Hola., Abrir la pagina de compania D= Link e mira el lista de FAQ.
Hasta leugo, Ad

D-Link 802.11g... | Answered on Sep 11, 2011


Make the FixYa experience better for everyone by voting.

Hi,

My name is Ben and I'm your guru, i.e., mentor, an influential teacher or popular expert: a management guru. - origin from Sanskrit, 'weighty, grave' for today.

As you evaluate my advice and suggestions, there are a few things you must keep in mind:

• I did not diagnose your problem and am therefore only able to evaluate what you tell me. For example, if you ask me a fuse location, that doesn't mean that I can tell you the reason why the fuse blew.
• A thorough diagnostic approach involves the use of technical equipment, such as voltage meters. scanning equipment and other sophisticated devices.
• Lastly, fixing one problem can very easily reveal a problem with something that you might consider unrelated. If that happens, you might want to view me as being incompetent but I must rely on what you do or do not tell me.

Subject: Unable to connect to Internet with a wireless router

Customer's exact description: Hi , when i go to the site 192.168.0.1, I put in "Admin" and leave the password blank, I still cannot log in. can you help me out? I need to create a password.

Discussion: I'm assuming that you are running a recent version of Microsoft Windows such as XP, Vista or 7. This will be a three (3) phase solution. It is imperative that each step be followed in order.

First Step:

Let's make certain that your operating system is ready to accept your router. Click on the following link and Microsoft will analyze your system and correct any deficiencies. Microsoft Fixit Site.

Second Step:

Make certain that your router is up-to-date.

Updates are regularly posted on the manufacturer's site to fix issues you encountered while attempting to use their device. The following will guide you on how to keep your device updated and working properly.

These are the common reasons why you need to do an upgrade:

• Dropping or intermittent connection
• Fix the bugs and known issues with the current firmware or driver version
• Basic Troubleshooting did not work

NOTE: For basic troubleshooting tips in wirelessly connecting to your router, please refer to your user manual.

Firmware updates are required especially if you start experiencing connection problems within your local network. An updated firmware also fixes the bugs of its previous version as well as providing new functionalities for the device. However, this should only be done after doing some basic troubleshooting that did not work.

NOTE: Updating the router's firmware is not recommended if there are no connectivity issues.

Adapters

A driver update for your adapter is necessary in order to enhance the wireless performance and functionality of your device. This is recommended especially if the adapter is not working properly after you updated the router or the computer itself. A corrupted driver will cause your adapter to stop working.

QUICK TIP: For Ethernet and wireless adapters, you need to download drivers while for devices such as routers, gateways and network access storage, you need to download the firmware. The table below will show the type of file you will download according to your device.

Third Step:

Connecting to the Internet using a Router

Choose a convenient location to begin installing your router, such as an open floor space or table. This does not need to be the permanent location of the router. For wireless routers, it may be necessary to re-position the unit after installing it as the signals may not reach all areas needed.

  • Unplug the power to your Internet modem.
  • Power down your computer(s).
  • Plug the power in to your router.
  • Connect your Internet modem to the router. The cable plugs into the router jack named "WAN" or "Internet". Turn on your Modem.
  • Connect one computer to the router. Even if the router is a wireless model, connect this first computer to the router via a network cable.
  • Turn on the computer.
  • From the computer connected to the router, open your web browser. Enter the router's address, http://192.168.2.1, and press Enter on your keyboard.
  • Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

To configure the router to connect to the Internet, you must enter information provided by your Internet Service Provider (ISP) into the "Connection Type" section in the left-hand column under the "Internet WAN" heading of the router's configuration page. If using DSL Internet, you may need to enter the PPPoE username and password. Likewise, if you have been issued a static IP address by your provider, the static IP fields (including network mask and gateway) must also must be set in the router.


Since this is a wireless router, change the network name (referred to as SSID). While the router comes to you with a network name set at the factory, you may want to use something more familiar for your network. Read Changing the Router's Wireless Channel and SSID -- or some other similiar language in your user guide --for a description of this process.

Verify that this computer can connect to the Internet properly. Open a new web browser and visit a few Internet sites such as Google.com or Yahoo.com.

Finally, configure additional network security features as desired to guard your systems against Internet attackers.

That's the three step program to solve this particular problem.

If you are still having problems, follow the steps outlined in the Windows operating instructions. Unfortunately, most individuals buy computers with the software installed by the manufacturer and don't receive the full manual.

  1. Open Internet Explorer
  2. Click on TOOLS
  3. Click on INTERNET OPTIONS
  4. Click on CONNECTIONS
  5. Click on SETUP
  6. Click on I WANT TO SET UP MY INTERNET CONNECTION MANUALLY
  7. Click on NEXT
  8. Click on I CONNECT THROUGH A LOCAL AREA NETWORK (LAN)
  9. Click on NEXT
  10. Click on NEXT [this is not a typo]
  11. Click on TO CONNECT TO THE INTERNET IMMEDIATELY .........; and,
  12. Click on FINISH


You should now be connected.

All the best,

Ben

D-Link 802.11g... | Answered on Sep 09, 2011


Type 192.168.0.1 on the address bar of your browser and open up that site. If its asking you to login, make use of "admin" for the username and password. Next, click on wireless setup and then click "manual wireless connection setup" then enable the Wireless Security Mode and it may ask you to setup your wireless network key which will be the one that your going to use if your going to connect a PC to your wireless network.

D-Link 802.11g... | Answered on Aug 28, 2011


Hello... stepp #1
rightclick wireless icon on taskbar, leftclick repair. if that does not work,
unplug power supply on router for about a minute, plug back in, do stepp
#1 again..

D-Link 802.11g... | Answered on Aug 27, 2011


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

D-Link 802.11g... | Answered on Aug 24, 2011


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

D-Link 802.11g... | Answered on Aug 16, 2011


connect your computer to the router and open internet explorer and in the address bar type, 192.168.0.1 and push enter. it might be 192.168.1.1, don't remember. login and setup your internet connection. if you have cable internet set it to DHCP. if you have DSL you will have to get the settings off the providers web site. you can also try resetting the router. with the power on, press the tiny reset button on the back of the router for about ten seconds. you will see the lights go out and come back on. once the router reboots try it again. Good luck.

D-Link 802.11g... | Answered on Aug 14, 2011


First you will need to find the local IP address of your router. It should look something like "192.168.0.1" You might be able to find it in either your router manual or on the bottom of the router itself.
Then make sure your computer is connected to the router via wireless or ethernet cable.
Next, open your browser and type in the IP address into the address bar. It should take you to a setup page that looks a lot like a website. Find the "wireless security" tab and select a security protocol. I recommend using either WPA or WPA2. Now you can set a password. Finally, there should be "save" button on the page. Click it, then wait for your router to reboot and your network is now secure.

D-Link 802.11g... | Answered on Aug 01, 2011


If you already tried with username = admin password = blank "no password at all" or password = "password" then the only way to recover the router will be by doing a hard resset, (pressing the resset button in the back for 12 seconds) be careful you are going to set the router back to factory default and you will need to configure it again usually this is the only way to get the router back

D-Link 802.11g... | Answered on Jul 25, 2011


If the default password on the D-Link has been changed then-
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON untilthe LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

D-Link 802.11g... | Answered on Jul 21, 2011


Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

D-Link 802.11g... | Answered on Jul 20, 2011


1.try replacing the power adapter.
2. If no power light then the adapter may be bad.
3. contact D link for this accessory or check eBay for an equivalent power adapter.

D-Link 802.11g... | Answered on Jul 14, 2011


try to power it off for 10sec. and remove all the cables and put it back again.if still have the same problem try to reset the router and reconfigure it again.

D-Link 802.11g... | Answered on Jul 05, 2011


reset the router to factory default. if you are confident. it is a small button at the back. press it coupel of sec then release. Then you can reset the password.

D-Link 802.11g... | Answered on Jun 26, 2011

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

780 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

secure dlink wireless connection

  • Computers & Internet
Loading...