20 Most Recent D-Link 802.11g Wireless Router WBR-1310 (WBR1310) - Page 9 Questions & Answers


Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.

reset.gif

Step 2 Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults.

Note: The factory defaults username is admin, and there is no password.

If you need more help come back.Post / thumbs / testimonial are welcome!

D-Link 802.11g... | Answered on Nov 20, 2010


First you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is usually 192.168.1.1 or 192.168.0.1 and lookup for the options to do the following: -
1. Change the SSID (Name) of the router
2. Change the default administrative user name and password (unless you've configured otherwise, the default username is admin and the password password.)
(The above step would prevent unauthorized access to your router)

Next step is to secure it:
1.On the left-hand side, under Setup, click "Wireless Settings" 2.Under "Security Options", select your desired encryption method (preferably WPA2-PSK)
3.Choose a Network Key - it can be anything, as long as it's 8-63 characters in length
4. Click Apply

Now your router and your connection would become secure and the user has to provide the network key to access the internet.

Hope this Helps!
CreativeTECH
Feel free to contact me for further assistance

CreativeTECH

D-Link 802.11g... | Answered on Nov 20, 2010


WPA is a strong form of wireless encryption, however not all wireless adapters support this feature. If your wireless adapter does not support WPA you will want to use WEP to secure your wireless network.

You can find information on configuring your WBR router for WEP here

Step 1: Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the left-hand side.

wpapsk01.jpg

Step 4: Select the type of WPA encryption you would like to use with your wireless adapter from the Security Mode drop down menu. For WPA-PSK select Enable WPA- Personal Wireless Security (enhanced).

Note: All wireless products on the wireless network must have the same level of security to connect to the network.

Step 5: In the WPA Personal section, configure the following:

  • Select the Cipher Type
  • Select the PSK or EAP
  • Enter your Passphrase
  • Re-Enter your Passphrase
Step 6: Click the Save Settings button to save your settings.

If you need more help come back.Post / thumbs / testimonial are welcome!

D-Link 802.11g... | Answered on Nov 19, 2010


Yes you can - If you do not know the login and password -
You can reset the D-Link back to the factory defaults by - power off the D-Link, press and hold the RESET button on the back of the router, then power up the router. Hold the RESET button for 5 secs and release the RESET button or until the LEDs flash together.
Connect a LAN cable from the D-Link to the LAN port on your computer and open a browser. Enter the D-Link's configuration URL http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings, eg. SSID and encryption etc.

To secure your wireless network from unauthorized access, please cick on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
.

D-Link 802.11g... | Answered on Nov 18, 2010


You can change the wireless name (SSID) and the wireless password by accessing the setup page. To access the setup page, do the following;

Open internet explorer or firefox and type in 192.168.0.1. It will ask for username and password. In the username field, type "Admin" , A in Admin should be a big letter. In the password field , don't type anything. Hit enter in yout keyboard and you will see the set-up page. In the set-up, look at the right side and click Wireless Settings and you will see Wireless Network Name (Also called the SSID) , and change that. Under Wireless Security Mode, change the wireless password or Passphrase.
moz-screenshot-3.pngmoz-screenshot-4.png

D-Link 802.11g... | Answered on Nov 10, 2010


Note: This FAQ uses the DIR-655 as an example, however the process is the same for all D-Link routers.

Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).

ip.jpg

Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .

admin.jpg



  • How do I find my routers IP Address, in Windows XP?
  • How do I reset my router back to the factory default settings?

    (NOTE: To reach the configuration page of your D-Link router in Mac OS, you will need to use a Java compatible browser such as Firefox or Camino.)

    (NOTE: Some routers have a "Captcha" graphical login option. This option can be disabled in the advanced options of the routers configuration.)
  • D-Link 802.11g... | Answered on Nov 09, 2010


    Hi,

    This Utility program from HP will help you locate few details on your network

    1. SSID ( network name )
    2. WEP/WPA Key ( Your network security key )
    3. The PC/Laptop IP Address
    4. Router IP address
    5. Which all Devices are connected to your Router/Network Wireless
    6. Which all Network are available nearby your place
    7. Let you access the Router Configuration

    Click here to Download the HP Network Diagnostic Utility

    Download the file on Desktop and Run the program ( Ex. File name = HPNDU.EXE )

    Follow the Instructions on the Screen and do accordingly.

    Regards,
    Ron

    D-Link 802.11g... | Answered on Nov 09, 2010


    Use the PING command to test the communication between the computer and the gateway.

    Goto Start > Run and enter COMMAND.
    From the Command Prompt, enter PING 192.168.0.1.
    The gateway should reply.

    Verify that the residential gateway is getting power. With the broadband modem connected to the WAN port on the gateway, you should have a soild WAN link light. You should use the same cable that connected the modem to the PC to connect the modem to the WAN port on the gateway. Any port on the gateway that has a computer connected to it should have the corresponding LAN link light lit. If you do not get the appropriate link lights, try using different cables.

    onfigure browser/Internet Options
    Step 1 Go to Start > Settings > Control Panel.

    Step 2 Double-click the Internet Options icon.

    Step 3 On the Security tab click Restore the default security level.

    Step 4 Click the Connection tab and set the dial-up option to Never Dial a Connection.

    Step 5 Click LAN Settings. Nothing should be checked. If anything is checked, uncheck it. Click OK.

    Step 6 Click the Advanced tab and then click Restore these settings to their defaults.

    Step 7 Click OK.

    Step 1 Turn the Cable/DSL modem off.

    Step 2 Turn the D-Link router off.

    Step 3 Wait 60 seconds.

    Step 4 Turn the cable/DSL modem back on and wait until all the lights are steady.

    Step 5 Turn the D-Link router on.

    Most routers and modems do not have an on/off switch. Simply unplug the power. Unplugging the power will not reset (reset back to default settings) the unit.

    D-Link 802.11g... | Answered on Nov 09, 2010


    Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).

    ip.jpg

    Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .

    admin.jpg


  • How do I find my routers IP Address, in Windows XP?
  • How do I reset my router back to the factory default settings?

    (NOTE: To reach the configuration page of your D-Link router in Mac OS, you will need to use a Java compatible browser such as Firefox or Camino.)

    (NOTE: Some routers have a "Captcha" graphical login option. This option can be disabled in the advanced options of the routers configuration.)
  • D-Link 802.11g... | Answered on Nov 07, 2010


    Check if your PC recognize the router.If not probably you need to keep moving it until the PC get the signal.

    D-Link 802.11g... | Answered on Nov 07, 2010


    Is there any computer connected to the router ?
    If not then you will need to connect the computer to the router.
    Do not change any wireless settings on the router with the wireless computer.
    you will need to connect the computer to the router with the Ethernet cable.
    check the IP address of the computer.
    open the router set up page of the router.
    Here you can change the wireless settings of the router.
    Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
    Click Here for step by step instructions

    D-Link 802.11g... | Answered on Nov 06, 2010


    After you applied to a company to get internet they give you 2 things: 1) is your user name and 2) is the password. your user name you use as is shows example: name (here your user name from company) @ISPname (here you make company name).net and last you write your password. You need these to connect to internet. You make this 1 time only. I hope that i helped.

    D-Link 802.11g... | Answered on Nov 05, 2010


    Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

    D-Link 802.11g... | Answered on Nov 04, 2010


    Go to D-Link - TechSupport FAQ and select model/version and start a new configuration.

    D-Link 802.11g... | Answered on Nov 04, 2010


    After confirming that your internet service is not down, perform the following steps:

    Open your command line prompt box on your computer by typing in cmd in the box that is labeled search or run.

    From that black prompt box that comes up, type ipconfig/release and then hit enter.

    Then type ipconfig/renew.

    If that does not work, unplug the USB leading to the router from your modem, then unplug power from the modem, then unplug power from the router.
    Wait at least five minutes before doing anything more.

    Reconnect power to the modem and wait for a connected status...this may take a few minutes.

    Then plug the USB cable from the wireless router back into the modem. Then reconnect the power back to the router. Wait for connection status.


    Once connected, you can configure the router over your computer by typing the IP address 192.168.0.1 and hit enter.
    This will bring you to an extensive user menu for your router. Navigate the pages until you locate the selection for a firmware update. This may not pertain to your problem you had but in any case may likely make your router operate better.

    D-Link 802.11g... | Answered on Nov 02, 2010


    Try to check the configuration setting of your wireless router. There must be a problem in one of its configuration settings causes it not to send out wireless signals.

    D-Link 802.11g... | Answered on Nov 02, 2010


    Download firmware from site
    http://www.dlink.com/products/?tab=1&pid=WBR-1310&rev=WBR-1310

    DLink states the login issue has been fixed with firmware v1.04 3/28/07

    Remember to get the right one for your unit model. You must connect a RJ45 cable to the router and computer you have downloaded the firmware to and remember which directory it's in. When it asks for the firmware put in the target location (c:\my documents\xxxxx) of the firmware file. Good luck.

    D-Link 802.11g... | Answered on Nov 02, 2010


    What problem? Just in case go to D-Link - TechSupport FAQ.

    If any more problem encounter,post or thumbs back.

    D-Link 802.11g... | Answered on Nov 02, 2010

    Not finding what you are looking for?
    D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

    780 questions posted

    Ask a Question

    Usually answered in minutes!

    Top D-Link Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2277 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Mike

    Level 3 Expert

    4363 Answers

    Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    View Most Popular

    D-Link Computers & Internet

    • D-Link Computers & Internet

    Most Popular Question

    secure dlink wireless connection

    • Computers & Internet
    Loading...