Lexmark X5470 All-In-One InkJet Printer - Answered Questions & Fixed issues


The 1203 error indicates either a communication problem between your cartridges and your printer or a short in one of the cartridges. Please follow the steps below to identify and fix the issue:

1. Make sure the printer is on.

2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.

Note: If the carrier does not automatically move to the center, turn off the printer/unplug the printer from the power source and then slide the carrier to the center.

3. Remove both cartridges from the carrier.

4. Close the printer cover.

5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

6. When the printer turns on, reinsert one cartridge first.

7. Close the printer cover and check for any errors.

8. If no error appears, reinsert the other cartridge. Close the printer cover.

9. Replace whichever cartridge is causing the error to appear with a new cartridge. Then try to print a document again to verify that the problem is fixed.

Lexmark X5470... | Answered on Jul 15, 2019 | 1,091 views


Karen,

Sounds like your card may have went bad. A good way to check this would be to use a different memory card. Hope that helps! Good luck!

Sincerely,

Jeremiah

Lexmark X5470... | Answered on Dec 28, 2017 | 45 views


What type of printer you're using?

Lexmark X5470... | Answered on Dec 19, 2017 | 47 views


Please find a full software driver for your printer and also it has to be compatible with your OS ( operating system ) the full software has the scanner and printer software in it . Once u download ! Then install . Start enjoying your device and problem won't occur again

Lexmark X5470... | Answered on Sep 06, 2017 | 110 views


Push and hold the 'Start" button after it fires up to turn it off. It should stay off after that. If that doesn't solve your problem then if you have it hooked up via USB cable just leave it unplugged until needed. If you are running it through your WiFi you can always just change your WiFi setting to Manual instead of Auto.

Lexmark X5470... | Answered on May 23, 2017 | 81 views


You should call on ((+1-800-585-2494 )) Toll Free Lexmark and get help for Lexmark.

Lexmark X5470... | Answered on Oct 10, 2018 | 34,956 views


ERROR 1203 LEXMARK ERROR 1200 Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Or try

Reset Factory Defaults on the Dellâ„¢ 964 or 966 Printer

To reset factory defaults on the printer, perform the following steps:

1. Press the down arrow button until Maintenance is highlighted and press the Select button.

2. Press the down arrow button until Reset Defaults is hightlighted and press the Select button.

3. The printer displays a confirmation message. Highlight Yes and press the Select button

Note:
Some settings such as phone lists, time, date, and country are not changed.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks




Lexmark X5470... | Answered on May 02, 2017 | 383 views


Have you tried plugging it in without surge protector? Also, open front cover and make sure there isn't another power switch in there. Some Lexmark's have a push power button on control panel....but have an actual physical power switch on the inside of the front cover. So it may not be fully powered off. I am a Lexmark Tech, I've seen this on a few models.

Lexmark X5470... | Answered on Mar 20, 2017 | 2,859 views


I hada the same problem. I used the settings on the actual printer rather than through the software to input the information it needed and It works fine now. I was able to set it up on my husbands laptop without any problems, I just added his laptop through installing the software on his laptops as it had picked up the signal and was showing in the Network and sharing centre on Windows Vista premium. Hope this helps. I think you need to take the wire out now and now load it as wireless. You need to use the wire first to connect then take it out to connect to the wirelss network. My router is a Sky router.

Tiptap

Lexmark X5470... | Answered on Sep 11, 2016 | 3,605 views


hi u can buy them on E/BAY..type in e/bay search---- 2- prong AC power cord cable lead for Lexmark printer scanner ac adaptor charger cost AU $3.20 good luck

Lexmark X5470... | Answered on Feb 01, 2017 | 105 views


Please try following steps:-
1) Check if your printer is power on
2) Cross check the usb cable
3) try changing the usb ports on laptop / desktop
if nothing works 99% your printer is not working

Lexmark X5470... | Answered on Apr 26, 2016 | 45 views


The Lexmark OCR scan software is available in the installation disk that came with the printer. You can explore the installation disk and look for the Abby setup application in the OCR folder (for Windows). For Mac OS, right-click on the Install icon and choose Show Package Contents. Open Contents folder > open Package folder and manually install the Abby Finereader application.
However, if you don't have the installation disk, contact Lexmark technical support. Thanks.

Lexmark X5470... | Answered on Sep 16, 2015 | 1,056 views


You will need to uninstall the existing driver first before installing the Windows 7 driver. Follow steps in this article: How to Uninstall Lexmark Printers. Reboot pc when prompted.
When pc turns on, check if your Windows is running on 32-bit or 64-bit System Type. Go to Start menu > right-click on Computer > Properties. Take note of the System Type.
To download the Windows 7 driver, go to the link below: - Lexmark X5470 Driver for Windows 7 32-bit - Lexmark X5470 Driver for Windows 7 64-bit

Download, execute the file and follow the instructions on your computer screen.

Lexmark X5470... | Answered on Sep 16, 2015 | 175 views


It Said Alignement problem 1. remove tape from cartridges 2. check paper 3. press retry

Lexmark X5470... | Answered on Aug 17, 2015 | 124 views


deebisaan kee cimee itti haa fufu

Lexmark X5470... | Answered on Apr 01, 2015 | 110 views


Annie, did you try to feed it one paper at a time? in many printers the feeder doesn't do a good job separating one paper from the rest.
another thing you can do is to turn off the printer and back on. this might get it out of the stuck status it is in.
did you check there isn't any paper stuck in the feeder?

Lexmark X5470... | Answered on Jan 14, 2015 | 124 views


There is not a Windows 7 driver available for this printer. That said, many devices will function under Windows 7 using the Windows Vista drivers.

Lexmark X5470... | Answered on Sep 07, 2014 | 73 views


Fiend your solution direct from Lexmark. Here is your solution

6741fae.jpg

http://www.lexmark.com/printer/prob676ijt65/solution
864

Lexmark X5470... | Answered on Jul 30, 2014 | 8,168 views


Hi,
I can understand that u get TWAIN driver not installed or required error on PC while scanning.
Twain drivers are imaging driver which are bundled with complete software.
Incase if you try to replace just the twain driver it may corrupt anoth files.
It is always advisable to clean the computer and reinstall the complete software.

Lexmark X5470... | Answered on May 04, 2014 | 632 views


I have a fix-all solution for you ink-jet printer people(only if it not a plotter). If it doesnt work after replacing an ink-cartrdge or print-head, through it away (recycle it) and by a LASER PRINTER. FIXED

Lexmark X5470... | Answered on Apr 22, 2014 | 25 views

Not finding what you are looking for?
Lexmark X5470 All-In-One InkJet Printer Logo

1,734 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...