20 Most Recent Hitachi 55HDS69 55 in. Plasma Television Questions & Answers


I have the same thing with my tv standby button comes on red flashes green then back to red need answers can u help if u can plz thanks

Hitachi 55HDS69... | Answered on Aug 14, 2018


Hi Mhansen884,
This type of failure is due to a defective upper and lower scan boards.
Check the link provided to see what the parts look like and or to find the part numbers if you would be DYI,

Hitachi 55HDS69... | Answered on Mar 03, 2017


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Hitachi 55HDS69... | Answered on Mar 19, 2016


Most likely the set (in its menu) is set to SAP or secondary audio program==this is for channels that offer simulcast of programs in English or Spanish etc.

Look for the setting and if SAP is highlighted try to select Stereo.

Hitachi 55HDS69... | Answered on Dec 10, 2014


Just do a factory reset to this set, and check. To do it, you've to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

Hitachi 55HDS69... | Answered on Feb 25, 2014


Denotes a y-sustain fault. If you wish to get some details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide / Flipcard, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window.
Blinking codes and troubleshooting to Plasma dispays are given in detail.

Hitachi 55HDS69... | Answered on Nov 11, 2013


Hello Dchampgus

Which remote are you having the issue with and are you having a problem with programming your box remote or is it the Tv remote

Hitachi 55HDS69... | Answered on Oct 03, 2013


that is called diffusion. that can be adjusted out in most cases by adjusting the y sustain pcb but can also be the main pcb, the logic pcb and panel itself but not likely.

Hitachi 55HDS69... | Answered on Aug 29, 2013


Was it dropped?
It sounds like panel has been damaged. There is an array of very fine connections on the top or bottom and the left or right (one each) and if you break the connecitons it looks like you describe.
Does it look like this? http://i16.photobucket.com/albums/b22/Ubermateo/vaioVertLines.jpg ?
-=/ MLF /=-

Hitachi 55HDS69... | Answered on Jul 02, 2013

Not finding what you are looking for?
Hitachi 55HDS69 55 in. Plasma Television Logo

187 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

hitachi plasma

  • Televison & Video
Loading...