20 Most Recent HP PL5060N 50 in. Plasma HDTV Questions & Answers


hi it sounds like your plasma has gone in stand by mode look on youtube will tell you all about stand by type in how to fix and tv make model stuck in stand by more than likely capacitors blown if your not any good soldering boards id phone tv guy out but if you are then youtube it hope this hopes

HP PL5060N 50... | Answered on Mar 04, 2018


Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

HP PL5060N 50... | Answered on Feb 20, 2018


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/

To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

HP PL5060N 50... | Answered on Mar 09, 2016


The TV needs professional service or replacement.

HP PL5060N 50... | Answered on Feb 03, 2016


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.

HP PL5060N 50... | Answered on Oct 18, 2015


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should trouble shoot. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

HP PL5060N 50... | Answered on May 13, 2015


That's a pretty broad question. Is it the cable, is it the female end on the back of the tv? If it's on the tv side of things then you'll need to open up the tv and check connections to the HDMI port. If all is good, replacing just the port is an option. It should have a part # on it if you want to be certain it has the same connection to your tv. I suspect they're almost all the same, I've only seen a few from a couple tv brands.

HP PL5060N 50... | Answered on Aug 28, 2014


There should be any short circuit to any of the circuit boards inside it. Check and locate the board first. Being a plasma display, the circuit will be quiet complicated to an experienced person to work on. If you wish to get some details, check the site linked here. Pull up older posts.

HP PL5060N 50... | Answered on Dec 09, 2013


Here's the number to HP case management 877-917-4380 ext.79, try this number and be firm that they need to fix this, I just had an HP plasma that was 3 yrs old replaced for free, no charge. Good luck

HP PL5060N 50... | Answered on Nov 01, 2013

Not finding what you are looking for?
HP PL5060N 50 in. Plasma HDTV Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Edward Easley
Edward Easley

Level 2 Expert

97 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Televison & Video

  • HP Televison & Video

Most Popular Question

hp pl5060n inputs problems

  • Televison & Video
Loading...